The 2016 Honda Odyssey uses a standard spin-on oil filter, and the typical OEM option is Honda Genuine part 15400-PLM-A01. You can also use aftermarket filters that fit the 3.5L V6, but it’s best to confirm the exact part number for your VIN with a Honda dealer or official parts catalog.
In practice, the Odyssey’s 3.5-liter V6 (J35 family) relies on a conventional oil-filter design that Honda has used across multiple model years. While 15400-PLM-A01 is the most commonly recommended option for many 2010s Odysseys, variations can occur by production date or region. Always verify the correct filter using your vehicle identification number (VIN) or by inspecting the old filter’s labeling before purchase.
Identifying the correct filter for your Odyssey
Below are the most common options to identify the right filter for a 2016 Odyssey, including the OEM choice and practical guidance for aftermarket compatibility.
- Honda Genuine oil filter: 15400-PLM-A01 — the standard OEM choice for many 3.5L Honda engines, including the Odyssey.
- VIN verification and dealer confirmation — some production dates or regional specifications may use a different factory number; verify with the parts catalog using your VIN.
- Aftermarket cross-reference — several brands (Bosch, Wix, Mann, Purolator, and others) offer filters that fit the 3.5L V6; ensure the product notes confirm compatibility with the Odyssey and 3.5L engine.
Choosing the right filter is important for proper filtration and seal integrity. If in doubt, consult your local Honda dealer or an independent shop to confirm the exact part number for your specific vehicle configuration.
How to replace the oil filter on a 2016 Odyssey
Manual oil changes on the 2016 Odyssey follow the standard spin-on filter replacement method. The steps below outline the typical process; always refer to your owner's manual for any model-year-specific notes.
- Prepare your workspace: park on a level surface, engage the parking brake, allow the engine to cool, and gather a new filter, the correct oil, a drain pan, and tools.
- Drain old oil: place the drain pan under the oil pan, remove the drain plug, and allow the oil to drain completely.
- Remove the old filter: use an oil filter wrench to loosen and remove the spin-on filter from its housing; be prepared for residual oil to spill.
- Prepare the new filter: lightly oil the gasket on the new filter with fresh engine oil to ensure a proper seal.
- Install the new filter: screw the new filter onto the housing by hand until snug, then give it a final gentle turn as recommended by the filter manufacturer; do not overtighten.
- Refill engine oil: replace the drain plug, and refill the engine with the proper type and amount of oil as specified in the owner's manual; use a funnel to avoid spills.
- Check for leaks and oil level: start the engine, run for a minute, shut off, wait a few minutes, and check the oil level; add oil if needed and inspect around the filter for leaks.
- Clean up and recycle: dispose of the used oil and old filter at an appropriate facility per local regulations.
Note: Always use the recommended oil grade (typically 0W-20 synthetic for the 3.5L engine, though regional specs may vary) and replace the filter at every oil change to maintain engine protection.
Summary
For the 2016 Honda Odyssey, the standard OEM oil filter is Honda Genuine 15400-PLM-A01, designed for the 3.5L V6 engine. Verify the exact part number for your vehicle using the VIN or dealer parts catalog, especially if your Odyssey was built in a different region or production window. Aftermarket filters that list compatibility with the 3.5L Honda V6 are also widely available, but ensuring a proper fit and seal is essential. Regular oil changes with a new filter help protect the engine and maintain performance.