The oil filter for a 2013 Honda Fit is Honda Genuine part number 15400-PLM-A02.
This article explains the official part, how to verify the correct filter for your car, and what to consider if you’re using aftermarket options. It covers how to confirm compatibility by VIN, what to look for on filters, and tips for installation and maintenance.
Official part numbers and compatibility
Honda generally lists the recommended oil filter for the 2013 Fit (1.5-liter engine) as the Honda Genuine filter 15400-PLM-A02. This part is designed to fit the engine used in most 2013 Fits sold in many markets. While regional catalogs may show slight revision differences, 15400-PLM-A02 is the widely cited standard in official Honda parts databases for this model year.
How to verify the correct filter for your specific car
To ensure you install the exact right filter for your vehicle, follow these steps:
- Check your owner's manual or the Honda service manual for the recommended oil filter part number for your trim and market.
- Compare the old filter (if you’re replacing one) to the new one to confirm matching thread size, gasket diameter, and overall height.
- Use your Vehicle Identification Number (VIN) to look up the exact parts catalog entry at an authorized Honda dealer or official parts site.
- If you’re considering an aftermarket option, choose a filter from a reputable brand that explicitly lists compatibility with the 1.5-liter Fit engine and matches the correct specs (thread type, gasket size, and overall dimensions).
- Double-check the packaging and part number before purchase to avoid misfits.
Following these steps helps ensure the filter you buy will seal properly and provide the intended filtration performance for your engine.
Installation tips and aftermarket options
If you choose to use an aftermarket filter, select a reputable brand and verify it meets or exceeds the original Equipment Manufacturer (OEM) specifications for the Fit’s 1.5-liter engine. Popular aftermarket brands include Purolator, Wix, Bosch, Fram, and Mann-Filter, among others. Always confirm that the aftermarket part is explicitly listed as compatible with the 2013 Honda Fit or with the same engine code (1.5L i-VTEC) to avoid fitment issues.
When installing, follow proper oil change procedure: warm the engine to operating temperature, shut off, relieve oil pressure, replace the filter with a new gasket, and apply a light coat of new oil to the gasket before threading it on to the specified tightness. Use the correct oil grade as recommended in your owner’s manual and ensure the drain plug is torqued to spec.
Where to buy and how to confirm compatibility
Parts databases from Honda and authorized retailers allow you to search by year, make, model, and VIN to confirm the exact oil filter part number. If in doubt, contact a Honda dealer or a trusted auto parts retailer with your VIN to verify that 15400-PLM-A02 is the correct choice for your specific vehicle configuration and production batch.
Summary
For a 2013 Honda Fit with the common 1.5-liter engine, the standard oil filter is Honda Genuine 15400-PLM-A02. Always confirm with your VIN or dealer to account for regional or production variations, and whether you opt for an OEM or reputable aftermarket filter. Proper fitment and installation are essential to maintain engine oil pressure and filtration performance.