The 2007 Honda Fit uses a standard spin-on oil filter designed for the car’s 1.5-liter engine. The exact part number can vary by market and production date, but the Honda Genuine filter is commonly referenced as 15410-5A2-000, with other nearby revisions (such as 15410-5A2-003 or 15410-5A0-000) appearing in some regions. Always verify the correct catalog number for your vehicle using your VIN or by checking the official parts diagram.
Overview of the 2007 Fit’s oil filter needs
The 2007 Fit is equipped with a 1.5-liter engine (commonly referred to by engine code L15A1 in North American models). It uses a traditional spin-on oil filter that screws onto the engine block. The filter works in concert with the car’s oil capacity and change interval, and a correct replacement is essential for protecting the engine’s internals.
Key factors that affect which filter you need
To ensure you get the right filter, consider these factors before purchasing:
- The market or country where the vehicle was sold, which can affect part numbering.
- The engine code and model year, which help confirm compatibility.
- The current filter’s labeling or the official parts diagram for your exact vehicle.
By confirming these details, you can confidently select the correct Honda Genuine filter or a compliant aftermarket option that matches the OEM specifications.
OEM versus aftermarket options
You can choose between OEM (Honda Genuine) filters or reputable aftermarket brands. OEM filters are designed to match the original specifications for the 1.5L engine, while aftermarket options often offer comparable filtration performance at a lower price. When selecting aftermarket filters, look for products that specify compatibility with the 1.5L Honda Fit and follow the manufacturer’s torque and installation instructions.
How to replace the oil filter
If you’re performing the replacement yourself, follow these general steps to change the filter safely and correctly:
- Warm the engine briefly, then turn it off and let it rest to avoid burns.
- Raise and secure the vehicle, place a drain pan beneath the oil pan, and remove the old drain plug to drain the oil (if you’re changing the oil alongside the filter).
- Remove the old oil filter using a filter wrench, being careful not to spill hot oil.
- Prepare the new filter by applying a light coat of fresh oil to the rubber gasket, then thread it on by hand until snug and give it an additional 3/4 turn (do not over-tighten).
- Reinstall the drain plug, replace the oil, and run the engine to check for leaks. Turn the engine off and inspect the filter area once more.
After completing the replacement, reset the oil-change indicator if your vehicle has one, and dispose of used oil and filters according to local regulations.
Where to buy and how to verify
You can purchase the filter from Honda dealers, authorized service centers, or reputable auto parts retailers. When ordering, provide your vehicle’s model year, engine code (L15A1 for many 2007 Fits in North America), and, if possible, the VIN to ensure you receive the correct part number for your market.
Summary
The 2007 Honda Fit uses a spin-on oil filter for its 1.5L engine, with common OEM part numbers around 15410-5A2-000 (and nearby revisions such as 15410-5A2-003 or 15410-5A0-000 depending on market). Verify the exact part using your VIN, engine code, and the official parts diagram. Whether you choose OEM or a trusted aftermarket option, ensure the filter and installation meet the car’s specifications and service guidelines.