The 2005 Honda Odyssey with the 3.5-liter V6 typically uses Honda’s OEM oil filter 15400-PLM-A01. You can install that exact filter, or opt for an aftermarket filter that cross-references to Honda’s specification and fits the 3.5L V6 engine.
Official specification
Honda’s parts catalog for the 2005 Odyssey (3.5L V6) lists the standard oil filter as the following part number.
Official part reference:
- 15400-PLM-A01 — Honda OEM oil filter
When in doubt, confirm via VIN or by consulting a Honda dealer, as there can be regional or production variances.
Aftermarket compatibility
If you prefer aftermarket, ensure the filter cross-references to Honda 15400-PLM-A01 for the 3.5L V6 and that the filter is designed to fit the Odyssey’s oil system. It’s important to verify the specific cross-reference with the retailer or manufacturer before purchase.
- Choose a filter that explicitly cross-references to 15400-PLM-A01 for the 2005 Odyssey’s 3.5L V6
- Ensure the filter is rated for Honda’s 3.5L V6 (engine code J35A in the applicable market)
- Match the same thread size and gasket dimensions as the OEM filter
In practice, many reputable brands offer filters that fit the 3.5L engine; always verify compatibility with the seller using your vehicle’s year, engine, and region.
How to verify for your specific vehicle
To ensure the filter matches your exact Odyssey, use VIN-based lookup or consult your dealer. The 2005 model year has variations by market and production run, so a VIN-specific check helps ensure you get the correct part number.
- Check the owner’s manual or the hood label for engine code and recommended filter
- Use Honda’s official parts database with your VIN to confirm the exact part number
- If buying aftermarket, provide the engine type (3.5L V6/J35A) and year to confirm the correct cross-reference
Double‑checking before purchase minimizes the risk of a non-fitting filter.
Installation and maintenance tips
Filter installation basics
When replacing the oil filter, lubricate the gasket with a thin layer of clean engine oil, thread the filter on by hand until it seats, then tighten per the OEM guidelines (typically a final snug turn beyond hand-tight). After installation, run the engine and check for leaks, then top off oil to the recommended level if needed.
Summary
For a 2005 Honda Odyssey, the standard oil filter is Honda part number 15400-PLM-A01. Use that exact filter or an aftermarket cross-reference that matches Honda’s specification for the 3.5L V6. Always verify compatibility with your VIN and follow proper installation procedures to ensure a proper seal and engine protection. If in doubt, consult a Honda dealer or trusted mechanic.