For a 2013 Honda Accord, the correct oil filter depends on which engine your car uses. The most common configuration is the 2.4-liter inline-4, which typically uses Honda’s OEM oil filter part number 15400-PLM-A02. If your Accord has the 3.5-liter V6, the usual filter is 15400-RAA-A01. Always confirm with your VIN or the parts diagram for your exact vehicle to be sure.
Engine options in the 2013 Accord
The 2013 Accord was offered with two main engines across trims and markets. Each engine has its own compatible oil filter design, so pairing the correct filter with the correct engine is important for performance and warranty considerations.
2.4-liter inline-4
The standard oil filter for most 2013 Accord models equipped with the 2.4L engine is Honda part number 15400-PLM-A02. This filter is designed to fit the K-series-based 2.4L powerplant used in many Accord trims of that year.
- 2.4L I-4: Honda part number 15400-PLM-A02
- 3.5L V-6: Honda part number 15400-RAA-A01
Note: Some regional or revision variants may use slightly different cross-references, but the OEM filter for the 2.4L is commonly 15400-PLM-A02, while the 3.5L V6 typically uses 15400-RAA-A01. Always verify with your VIN or parts catalog.
How to verify the exact filter for your car
Because part numbers can differ by market, trim, or revision, use these steps to confirm the precise oil filter for your 2013 Accord:
- Check the owner’s manual or the underside of the current filter for the part number.
- Identify your engine type (2.4L I-4 vs. 3.5L V6) to narrow the search.
- Enter your VIN on Honda’s official parts lookup, or visit a dealer/parts counter with your VIN to pull the exact match.
- Cross-check aftermarket options (e.g., Wix, Purolator, Bosch) against the OEM cross-reference for your engine.
- When in doubt, consult the parts diagram for your exact vehicle or call a dealer to confirm.
Verifying the exact filter using VIN or a reliable parts catalog ensures you purchase the correct model for your engine and avoid mistakes.
Choosing the right filter type
Beyond the exact OEM number, you’ll also decide between genuine Honda filters and aftermarket options. Each choice has its advantages:
- Honda OEM filter (recommended): Best fit, filtration, and warranty compatibility.
- Quality aftermarket filters (e.g., Wix, Bosch, Purolator): Often cost less and offer comparable filtration if you choose a model designed for Honda engines.
When selecting aftermarket options, ensure the filter is explicitly listed as compatible with the 2.4L or 3.5L Honda Accord engine from that model year and that it meets or exceeds OEM filtration standards.
Summary
The 2013 Honda Accord requires different oil filters depending on the engine. The typical pair is 15400-PLM-A02 for the 2.4L I-4 and 15400-RAA-A01 for the 3.5L V6, but VIN-based confirmation is essential to avoid errors. Always verify through the VIN lookup, the owner’s manual, or a trusted parts counter, and choose between OEM or reputable aftermarket filters based on your maintenance preferences.
What oil filter goes in a 2013 Honda Accord?
Original Equipment Honda Oil Filter - 15400PLM-A02.
What kind of oil does a Honda Accord 2013 take?
The recommended Honda Accord oil is generally a synthetic 0W-20 formula.
Where is the oil filter on a 2013 Honda Accord?
And start loosening the uh nut here bolt. Here remember this is going to be pretty hot. And you might want to have a few shop towels. Ready try to catch the bolt if you can here we go.
What oil filter do I need for my Honda Accord?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.