The 2010 Ford Fusion Hybrid uses a 2.5-liter Duratec engine and should use the Motorcraft FL-400S oil filter (or an equivalent Ford-certified filter) along with 5W-20 oil. This OEM choice ensures proper fit and sealing for the engine in that model year.
Engine and filter compatibility
The Fusion Hybrid’s powertrain centers on a 2.5L Duratec four-cylinder engine that operates in Atkinson cycle and works with the hybrid system. The required oil filter is the same as other 2.5L Duratec engines from Ford around 2008–2013. When shopping, select a filter that explicitly lists compatibility with Ford 2.5L Duratec/Atkinson engines and with 5W-20 oil.
Recommended options
For the best fit and reliability, start with the OEM Motorcraft option. If you prefer aftermarket, verify that the product packaging clearly states compatibility with Ford 2.5L Duratec or 2.5L I4 engines and with 5W-20 oil, and cross-reference using your vehicle’s VIN or engine code to ensure the exact match.
Use this quick-reference checklist to confirm the filter will fit your Fusion Hybrid's engine.
- Motorcraft FL-400S is the OEM filter commonly recommended for the 2.5L Duratec engines used in the 2010 Fusion Hybrid.
- Ensure any aftermarket filter is labeled for Ford 2.5L Duratec or "2.5L I4" engines and compatible with 5W-20 oil.
- Verify fit via VIN or engine code when buying from a parts store or online to confirm the exact part number.
Bottom line: The OEM Motorcraft FL-400S is the safest choice for the 2.5L Duratec in the 2010 Fusion Hybrid; aftermarket filters can work if they clearly match Ford 2.5L Duratec/Atkinson engines and 5W-20 oil compatibility.
Oil type and capacity
Pair the filter with the recommended oil specification. The 2010 Fusion Hybrid generally calls for 5W-20 synthetic or synthetic-blend oil, and the total capacity with a filter change is approximately 4.5 quarts (about 4.3–4.8 quarts depending on drainage). Always check the owner's manual or the oil-change sticker for the exact specification for your vehicle.
How to replace the filter
Replacing the oil filter is part of a standard oil-change procedure. Gather a new oil filter, the correct oil, a drain pan, and basic hand tools. Lubricate the filter gasket with a little fresh oil, install by hand, and avoid over-tightening. After installation, run the engine, check for leaks, and reset the oil-life indicator if your vehicle has one.
Summary
For a 2010 Ford Fusion Hybrid, use the Motorcraft FL-400S oil filter (or an equivalent Ford-certified filter) paired with 5W-20 oil. This ensures proper fit and protection for the 2.5L Duratec engine. If choosing aftermarket, verify compatibility with Ford’s 2.5L Duratec/Atkinson engines and the 5W-20 specification, ideally by checking your VIN.
Where is the oil filter on a 2010 Ford Fusion Hybrid?
So we're going to remove it. And this uses a 7 mm. Socket. Okay so I'm going to be removing this oil filter. I'm going to be using this cup tight oil filter wrench to unscrew. It.
What type of oil filter does a 2010 Ford Fusion take?
The 2010 Fusion requires a spin-on oil filter that's roughly the size of a soup can, and it's meant to last between your oil change intervals.
What type of oil does a 2010 Ford Fusion Hybrid take?
2010 Ford Fusion 2.5L L4 Hybrid. - 6 quarts Genuine Motorcraft Full Synthetic Engine oil 5w20.
What is the best oil filter for a hybrid car?
Top Oil Filters for Hybrid Vehicles
One of the leading oil filters in the market for hybrid cars is the Fram XG7317 Ultra Synthetic Spin-On Oil Filter. This oil filter features an enhanced filter media that provides superior engine protection and efficiency, making it an excellent choice for hybrid vehicle owners.