The right oil filter for a 2008 Honda Fit is the Honda Genuine filter designed for the 1.5L engine, with several widely used aftermarket cross-references available. Verify the fit using your VIN or engine code to be certain.
The 2008 Honda Fit, typically equipped with the 1.5-liter four-cylinder engine, uses an oil filter designed to accommodate that engine family. Because regional variations exist, the exact part number can differ by market and production batch. This guide provides reliable options and steps to confirm the correct filter for your specific vehicle.
Recommended oil filter options for the 2008 Honda Fit
Below are common choices that fit the 2008 Fit. The Honda Genuine filter is the safest option, followed by well-known aftermarket cross-references. Always confirm fit for your VIN.
OEM vs aftermarket considerations
- Honda Genuine: Part number 15400-PLM-A02 (commonly used for many 2007–2008 Fits with the 1.5L engine).
- Fram: PH7317 – a widely used aftermarket option compatible with the 1.5L Honda engine in many Fits.
- Bosch: 3330 – another common aftermarket cross-reference for the 1.5L Honda i‑DSI/1.5L family in Fits.
- Wix: 51341 – a representative cross-reference that fits the same engine family; verify with VIN.
Concluding paragraph: These options cover OEM and widely available aftermarket filters. Always verify the exact filter using your VIN, and check whether your market requires a different part number.
How to verify the correct oil filter for your 2008 Fit
Before purchasing, verify compatibility through reliable sources. The steps below help ensure you get the right filter for your engine variant.
- Check the owner’s manual for the oil filter specification and recommended part numbers specific to your model year and market.
- Inspect the existing filter for a part number or cross-reference printed on its side.
- Confirm your engine code (US-spec Fits commonly use the 1.5L engine; variations may be L15A1 or L15A2 in different markets) and compare with cross-reference lists from the filter manufacturer.
- When in doubt, contact a dealership parts counter or use a reputable auto parts retailer’s fitment tool by entering your year, make, model, and engine code or VIN.
Concluding paragraph: Taking these steps minimizes the risk of ordering the wrong filter and ensures compatibility with your 2008 Honda Fit.
Installation and maintenance tips
After you have the correct filter, install it properly and follow maintenance best practices to ensure engine protection and optimal performance.
- Prepare a clean workspace, gather fresh oil and the proper filter, and have a new drain plug gasket if needed.
- Apply a thin film of clean oil to the gasket on the new filter before installation, thread gently, and tighten according to the manufacturer’s torque specs (usually hand-tight plus a quarter-turn).
- Dispose of the old filter and oil properly and reset any maintenance reminders in the vehicle if applicable.
Concluding paragraph: Proper filter selection and installation extend engine life and help maintain fuel efficiency and emissions standards.
Summary
For a 2008 Honda Fit, the safest approach is to use the Honda Genuine oil filter 15400-PLM-A02, with several widely used aftermarket cross-references such as Fram PH7317, Bosch 3330, and Wix 51341. Always verify compatibility with your specific VIN and engine code, and consult the owner's manual or a dealer if in doubt. Following the correct filter type and installation steps is essential for long-term engine protection.