The 2017 Honda Accord V6 uses 0W-20 full-synthetic motor oil.
Oil specifications for the 2017 Accord V6
Recommended oil grade
Official guidance for the 3.5-liter V6 in the 2017 Accord specifies a 0W-20 full-synthetic oil. Use Honda Genuine 0W-20 or an equivalent that meets API SN (or newer) and ILSAC GF-5 standards. Always check your local manual, as regional requirements can vary.
- 0W-20 full synthetic motor oil
- Honda Genuine or equivalent that meets API SN or newer and ILSAC GF-5
Sticking to this specification helps protect the engine, maintain fuel efficiency, and ensure reliable cold-start performance across climates.
Oil capacity
The 3.5L V6 requires about 5.7 quarts of oil when performing an oil and filter change.
- Approximately 5.7 quarts of oil with filter
Begin with a partial fill and use the dipstick to bring the level up to the full mark after the first check.
Oil change interval
Maintenance intervals vary by driving conditions. For normal driving with synthetic oil, Honda typically recommends about 7,500 miles (12 months). In severe conditions—such as frequent towing, extreme temperatures, or heavy stop-and-go driving—shorten the interval to roughly 3,750 miles (6 months).
- Normal driving: 7,500 miles / 12 months
- Severe service: 3,750 miles / 6 months
Always consult the owner’s manual and your vehicle’s maintenance minder to tailor schedules to your specific usage and region.
Summary
For the 2017 Honda Accord V6, use 0W-20 full-synthetic oil (Honda Genuine or equivalent meeting API SN and ILSAC GF-5). Oil capacity is about 5.7 quarts with filter, and maintenance intervals range from 7,500 miles under normal conditions to 3,750 miles under severe conditions. Always verify exact specifications in your owner’s manual.