The 4.7 L Toyota V8 (the 2UZ-FE) typically requires 5W-30 motor oil, in a full synthetic or synthetic-blend formulation, and roughly 6.0 quarts (about 5.7 liters) of oil with a new filter for an oil-change refill. Always verify the exact specification for your year and environment in your owner’s manual or with Toyota.
Oil grade and viscosity
Choosing the right viscosity and oil specification helps protect the engine and maintain performance across climates. For the 2UZ-FE, the standard recommendation is a 5W-30 grade that meets current API standards and is compatible with ILSAC GF-6 (or newer) where applicable. This viscosity works well for most driving conditions and temperatures.
Common viscosity choices
Below are the typical oil viscosity options you’ll encounter for this engine. Use the option that matches your climate and availability, prioritizing the standard recommendation above.
- 5W-30, synthetic blend or full synthetic, API SN (or newer) and ILSAC GF-6 or newer
- 10W-30, conventional or synthetic blend, acceptable if 5W-30 isn’t available or in certain very hot climates
In short, 5W-30 is the preferred choice for most owners. 10W-30 serves as a fallback option where 5W-30 cannot be sourced, but always aim for the standard specification.
Oil capacity and change guidance
For a typical 4.7 L V8 oil-change, expect to add about 6.0 quarts (approximately 5.7 liters) of oil after draining and replacing the filter. Use the dipstick to bring the level to the full mark after a proper refill.
Change intervals depend on oil type and driving conditions. A common guidance framework is:
- Conventional oil: roughly every 5,000 miles (8,000 km) or 6 months, whichever comes first
- Synthetic oil: roughly every 7,500–10,000 miles (12,000–16,000 km), depending on conditions and the oil you choose
Always consult your owner's manual for the exact service schedule and consider more frequent changes under severe driving conditions (short trips, heavy towing, dusty environments).
Practical considerations and tips
To ensure you’re using the best oil for your vehicle, consider these tips: opt for a reputable brand with API SP or newer designation, confirm compatibility with ILSAC GF-6 or newer, and avoid non-recommended grades unless explicitly advised by Toyota for your model year.
Summary
For most 4.7 L Toyota V8 applications, the recommended oil is 5W-30 (synthetic blend or full synthetic) meeting current API standards, with about 6.0 quarts needed for an oil change. Use 10W-30 only as a fallback if 5W-30 is unavailable, and follow the manual’s guidance on service intervals. Always verify your exact year and model variant to ensure the correct specification.
Can I put 5w30 instead of 0w20 on a Toyota?
Modern engines designed for 0W-20 oil require specific viscosity for optimal performance, and using thicker 5W-30 oil may compromise efficiency while potentially voiding manufacturer warranties.
What kind of oil does a 4.7 V8 take?
SAE 5W-30
Engine Oil
5W-30 (Below 38°C) - SAE 5W-30 is preferred.
What kind of oil does a 4.7 Toyota V8 take?
5W-30 motor oil
The 2007 Toyota Tundra 4.7L V8 typically uses 5W-30 motor oil; consult your owner's manual for exact specifications and regional recommendations. We offer Toyota-approved conventional and synthetic oils; synthetic provides better protection, thermal stability, and longer intervals between changes.
What oil goes in a 2001 Toyota Tundra 4.7 liter V8?
AMSOIL OE 5W-30 100% Synthetic Motor Oil.