The 2.4 L Dodge Dart typically uses 5W-20 synthetic engine oil, with an oil capacity of about 5 quarts (4.7 liters) including the filter.
Recommended oil grade and capacity
Key specifications to follow when performing an oil change on the 2.4 L Tigershark engine.
- Oil grade: 5W-20 synthetic oil (API SN or newer; ILSAC GF-5 or GF-6 approved)
- Oil capacity: 5 quarts (4.7 liters) including the replacement filter
- Filter: use a standard replacement filter meeting OEM Mopar specifications
Adhering to these specifications helps ensure proper lubrication, cold-start protection, and engine longevity.
Why 5W-20 and what it does for the engine
The 2.4 L Tigershark engine is designed to run on 5W-20 to balance cold-start performance with protection at operating temperature and to optimize fuel efficiency. Using a heavier oil could reduce fuel economy and warm-up characteristics, while a thinner oil may not provide adequate film strength at high load.
Oil specification details and compatibility
The engine requires oil meeting API SN or newer and ILSAC GF-5 or GF-6 standards. Choose a high-quality fully synthetic or synthetic-blend oil from a reputable brand to ensure proper lubrication and sludge resistance. Always verify the exact spec on your owner's manual or the oil cap for your model year, as specifications can vary slightly by year or market.
Maintenance intervals and notes
Oil change intervals vary by driving conditions and oil quality. For most 2.4 L Dodge Dart models using synthetic oil, an oil change every 7,500 miles (12,000 km) or 12 months, whichever comes first, is common under normal driving. In severe service (short trips, heavy traffic, extreme temperatures, towing), more frequent changes are advised. The vehicle's oil life monitor (OLM) will indicate when a change is due.
- Normal driving interval: 7,500 miles (12,000 km) or 12 months, whichever comes first
- Severe service: more frequent changes as indicated by the OLM or manual guidance
- Oil life monitor: follow the OLM’s readiness rather than calendar intervals alone
Always verify the maintenance schedule in your owner’s manual, and use the OLM to guide changes depending on your actual driving conditions.
Summary
The Dodge Dart’s 2.4 L Tigershark engine uses 5W-20 synthetic oil, with an oil capacity of about 5 quarts including the filter. Use an API SN+ or newer oil meeting ILSAC GF-5 or GF-6, and replace the oil filter with a compatible Mopar or equivalent. In normal driving, plan for a change about every 7,500 miles (12,000 km) or 12 months, guided by the oil life monitor and your manual. These practices help ensure reliable performance and engine longevity.