Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What oil does a 2020 Honda Civic SI take?

The 2020 Honda Civic Si requires 0W-20 full-synthetic engine oil.


The Civic Si uses a turbocharged 1.5-liter engine, and Honda specifies a 0W-20 lubricant to optimize cold-start protection, fuel economy, and turbo longevity. This guide explains exactly what oil to use and the standards it should meet.


Oil specifications and grade


To ensure compatibility and performance, look for oils that meet the following criteria.


Before listing the key requirements, note that the right oil must fulfill both viscosity and certification standards to protect the engine under all typical driving conditions.



  • 0W-20 synthetic motor oil

  • API performance category SN or newer (e.g., SN Plus, SP)

  • ILSAC specification GF-5 or newer

  • Honda specification HTO-06 or equivalent


Choosing oil that meets these standards helps maintain turbo efficiency, proper lubrication, and warranty compliance.


Oil capacity and change considerations


For the 2020 Civic Si, the engine oil capacity with filter is approximately 3.7 quarts (3.5 liters). When topping off or changing oil, use a clean funnel and check the level with the dipstick to ensure you reach the correct mark.


Always follow Honda’s maintenance minder and consult the owner’s manual for the recommended service interval, as factors such as climate and driving conditions can affect how often you should change the oil.


Where to source the right oil


Use a reputable brand that offers a 0W-20 synthetic oil that meets API SN (or newer) and ILSAC GF-5 (or newer) standards, and ensure it carries Honda’s HTO-06 specification or a direct equivalent. Honda Genuine Motor Oil labeled 0W-20 is a reliable option, but many third-party brands advertise compatibility when meeting the same standards.


Summary


The 2020 Honda Civic Si runs on 0W-20 full-synthetic oil that complies with API SN or newer and ILSAC GF-5 or newer, with Honda’s HTO-06 specification as a baseline. Use about 3.7 quarts (3.5 liters) per change, and follow the maintenance minder for scheduling intervals. By sticking to these specifications, you help protect the turbocharged engine, maximize fuel efficiency, and maintain warranty coverage.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.