The 2020 Dodge Charger V6 (3.6L Pentastar) requires 5W-20 full-synthetic engine oil. This is the standard specification from Dodge for the 3.6L V6, and it should meet API SN and ILSAC GF-5 standards.
Engine oil grade and specification
The Charger’s 3.6L Pentastar V6 is designed to run on 5W-20 synthetic motor oil. Using the recommended grade helps ensure reliable lubrication across operating conditions and maintains warranty coverage. Use an oil that meets or exceeds API SN and ILSAC GF-5 requirements. If you are using a different grade, refer to the owner's manual for the official lubricant standards.
Choosing a brand and viscosity
Choose a reputable 5W-20 full-synthetic motor oil that meets API SN and ILSAC GF-5. Mopar, Pennzoil, Mobil 1, and other major brands offer 5W-20 formulations that meet these specs. If you have any doubt, consult your dealer or the owner's manual for approved products.
Maintenance and oil-change intervals
Oil-change intervals depend on driving conditions and the oil-life monitoring system. Under normal driving, many owners replace the oil around every 7,500 miles, but in severe conditions—short trips, heavy traffic, extreme temperatures, or towing—you may need more frequent changes. Always follow the interval indicated by the vehicle's oil-life monitor and the owner's manual.
Notes on other engines
Charger models with the 5.7L Hemi or 6.2L supercharged variants require different oil types and capacities. The 3.6L V6 specifically uses 5W-20 synthetic as outlined above. If you are unsure which engine is in your Charger, check the VIN label or the owner's manual.
Oil-level checks and topping up
Check the engine oil level with the dipstick after the engine has cooled or idled for a few minutes. Use the correct fill to reach the full mark. If you are topping up, add small amounts and recheck to avoid overfilling. Use the recommended 5W-20 oil and replace the oil filter during each oil change.
Summary
For the 2020 Dodge Charger V6 (3.6L Pentastar), use 5W-20 full-synthetic engine oil that meets API SN and ILSAC GF-5 standards. Maintain with oil changes per the owner's manual and the vehicle's oil-life monitor—typically about every 7,500 miles under normal conditions, more often in severe service. Always consult the manual for your specific vehicle and use a reputable brand.