The 2013 Nissan Juke typically uses 0W-20 full-synthetic engine oil, meeting API SN or newer and ILSAC GF-5. This is the standard grade for the 1.6-liter engines found in most markets.
There are variations by market and trim, including turbocharged variants and different climate conditions. Always verify the exact specification in your owner’s manual or with a Nissan dealer, and check the oil cap for the grade printed on it.
Oil specifications and options
Below are the common options that meet Nissan’s requirements for the 2013 Juke. Use a high-quality full-synthetic oil that carries these specs. If you can’t locate 0W-20, an alternative grade may be allowed only as specified in the manual.
- 0W-20 synthetic motor oil that meets API SN or higher and ILSAC GF-5 (Nissan Genuine Motor Oil or equivalent brand).
- In some regions, 5W-30 synthetic motor oil may be acceptable if 0W-20 is unavailable; verify with the manual or your dealer for climate-specific allowances.
Bottom line: use 0W-20 synthetic oil meeting SN/GF-5. If 0W-20 isn’t available, consult the manual for approved alternatives and plan to switch to the recommended grade as soon as possible.
Market-specific considerations
Turbocharged DIG-T variants or operation in extreme heat may have different recommendations. Always confirm the exact specification for your VIN in the owner’s manual or with a Nissan technician.
Oil capacity and service considerations
Consult the owner’s manual for the precise oil capacity and service interval for your engine. Nissan recommends using a high-quality synthetic oil and following the manufacturer’s maintenance schedule; harsh driving conditions may warrant more frequent changes.
Where to find the most accurate guidance
Best sources are the owner’s manual and the oil-fill cap on your engine. For absolute certainty, contact a Nissan dealer or certified mechanic with your VIN, as region-specific guidance can apply.
Summary
The 2013 Nissan Juke generally takes 0W-20 full-synthetic engine oil that meets API SN or higher and ILSAC GF-5. Always verify the exact specification for your vehicle in the owner’s manual or with a dealer, since variations can occur by market or trim. If 0W-20 isn’t available, check the manual for approved alternatives and use a high-quality oil that matches the required specs.