The typical oil for the common 2008 Citroën C1 with a 1.0-litre petrol engine is a fully synthetic SAE 5W-40, and you’ll need about 3.0 liters of oil when you change the filter. Always verify the exact specification for your engine code in the owner’s manual or with a Citroën dealer, as there can be variations by market.
Engine options and oil needs in the 2008 C1
In 2008, the C1 primarily used a 1.0-litre 12V petrol engine. Diesel options were generally not offered for this model year in Europe. The following guidance covers that engine family.
- Oil grade: Fully synthetic SAE 5W-40 is the standard recommendation for the 1.0-litre petrol engine.
- Alternative when 5W-40 is unavailable: Some markets allow a high-quality 5W-30 synthetic as a temporary substitute; verify with your manual or dealer for your VIN.
- Oil capacity (including filter): Approximately 3.0 liters (typical range 3.0–3.2/3.3 L depending on filter size).
Concluding paragraph: The core guidance is to use a fully synthetic 5W-40 oil for the 1.0-litre engine, with roughly 3 liters required for a full change including the filter. Always rely on the vehicle-specific manual for the exact specification and capacity.
If you are changing oil yourself: step-by-step
Before you begin, ensure you have the correct oil grade and quantity, and then follow these common steps for the C1’s 1.0 petrol engine.
- Warm up the engine briefly to loosen the oil, then park on level ground and switch off the engine.
- Place a drain tray beneath the sump, remove the drain plug, and let the old oil drain completely.
- Remove the old oil filter and replace it with a new one, being careful not to overtighten.
- Refill with the correct amount of 5W-40 synthetic oil (about 3.0 L for a full change).
- Check for leaks, wipe the dipstick, and bring the level up to the proper mark after running the engine for a minute or two, then recheck again.
Concluding paragraph: Proper disposal of used oil and a proper reset of any service indicators are important. If you’re unsure about the exact capacity or spec for your vehicle, consult a qualified technician.
Summary: For a 2008 Citroën C1, the typical engine oil is fully synthetic 5W-40, with an approximate capacity of 3.0 liters including the filter. Confirm the exact specification for your engine code and climate in the owner's manual, and consult a dealer if in doubt.
Which oil is best for a Citroen C1?
| Parameter | Petrol Engine | Diesel Engine |
|---|---|---|
| Recommended Brands | Motul, Mobil1, Elf | Liqui Moly, Total, Valvoline |
| Biofuel Compatibility | No | Yes (up to B7) |
| Oil Type | Synthetic | Synthetic |
| Temperature Range | -25°C to +30°C | -25°C to +30°C |
Ask about result
What kind of oil does a Citroen C take?
Citroen C-Crosser Engine Oil Morris C3 5W-30 (5 Litre) Morris Multivis ADT C3 5W-30 superior quality engine engine oil with synthetic technology is designed to meet the demands of the latest petrol and diesel (inc turbo) engines where low viscosity oil is required.
Ask about result
Can I put 10w40 in a Citroen C1?
Yes 10w40 is better for the higher mileage engines.
Ask about result
What oil does a Citroen C1 2008 use?
This MPM Oil Engine Oil fits the following vehicles
| Description | Motor Oil 5W-40 Premium Synthetic |
|---|---|
| Engine Code | 384F, 384F (CFA), 1KR-FE |
| BHP | 67 |
| Fitment Detail | Engine |
| Use Conditions | Normal |
Ask about result