The recommended oil is 0W-20 synthetic motor oil that meets Chrysler MS-6395 specifications, with a total capacity of about six quarts. Regular changes help keep the 2019 Pacifica’s 3.6-liter V6 performing at its best.
Oil type and specifications
The following list summarizes the official oil grade, standards, and compatible options commonly used by owners and technicians.
- Viscosity: 0W-20
- Type: Full-synthetic motor oil
- Standards: API SN or newer; ILSAC GF-6 compatible oils are acceptable; Chrysler MS-6395 compliance is preferred
- Chrysler specification: MS-6395 (the standard for 0W-20 synthetic oils used in the 3.6L Pentastar V6)
- Brand compatibility: Mopar-branded oils that meet MS-6395 are commonly recommended, with many major brands offering MS-6395-compliant 0W-20 options
In short, ensure you choose a 0W-20 full-synthetic oil that explicitly meets MS-6395 and is API SN or newer (GF-6 compatibility is also acceptable).
Oil capacity and change intervals
The following list covers how much oil the engine uses and how often it should be changed under typical driving conditions.
- Oil capacity (with filter): about 5.9–6.0 quarts (roughly 5.6–5.7 liters)
- Change interval (normal driving): up to 7,500 miles (12,000 km) or 12 months, whichever comes first
- Change interval (severe service): typically 3,000–5,000 miles (4,800–8,000 km), depending on conditions such as temperature extremes, towing, or heavy stop-and-go driving
- Best practice: replace the oil filter with every oil change and reset the oil life monitor if your vehicle is equipped with one
These guidelines help drivers plan ahead for maintenance and ensure the engine remains properly lubricated under their typical driving patterns.
Practical considerations
Climate and driving patterns
In very hot or very cold climates, or if you regularly tow or do a lot of short trips, you may lean toward the severe-service end of the interval. Always follow the owner's manual recommendations for your specific conditions.
Top-up and verification
Keep a bottle of 0W-20 on hand for minor top-offs, and check the oil level regularly between changes to avoid running low, which can harm engine performance.
Summary
For a 2019 Chrysler Pacifica, use 0W-20 synthetic oil that meets Chrysler MS-6395, with an approximate capacity of six quarts. Normal oil-change intervals are about 7,500 miles, while severe-service driving may require changes as often as 3,000–5,000 miles. Always verify the exact requirements in the owner's manual and choose a reputable oil that explicitly meets the MS-6395 specification.