The 2019 Kia Sorento typically uses a canister-style oil filter housing with a replaceable cartridge element, rather than a simple spin-on filter. The exact filter size and part number depend on the engine (2.4L four-cylinder or 3.3L V6) and the market, so it’s important to verify with your VIN or owner’s manual.
Engine options and filter style
2019 Sorento models came with at least two engines, and while both share the same maintenance concept, the filter kit you buy should match your specific engine. In practice, most Sorento engines use a cartridge-style filter inside a canister housing rather than a traditional external spin-on canister. Confirming the engine type helps ensure you purchase the correct filter kit and seals.
Two common engines to consider
The following notes apply to the typical 2019 Sorento configurations. Always cross-check with your vehicle’s VIN to be certain:
- 2.4L inline-4 engine variants use a canister-style filter with a replaceable element.
- 3.3L V6 variants also use a cartridge-style filter housed in a canister, not a loose spin-on canister.
Whether you’re performing routine maintenance yourself or ordering parts, the key is to match the filter to the engine code and the housing type. If you’re unsure, consult the owner's manual, your local Kia dealer, or an online parts lookup using your VIN for the exact filter kit.
Before you buy, consider these practical steps to confirm the correct filter type for your Sorento:
- Check the owner’s manual or maintenance schedule for the specified filter type and viscosity.
- Inspect the under-hood oil filter area: a cap that unscrews to reveal a replaceable cartridge indicates a canister cartridge filter; a single threaded canister indicates a spin-on style (rare for 2019 Sorento but possible in other models).
- Note the engine code (often near the engine stamp or in the vehicle’s information display) to match the correct filter kit.
Once you’ve identified the exact configuration, you’ll have a straightforward path to selecting the right filter kit and ensuring proper sealing and filtration.
Recommended filter options by engine type
Here are common, widely compatible choices for the 2019 Sorento, aligned with engine type. Always verify compatibility for your exact VIN before purchasing.
- OEM Kia/Hyundai canister-style oil filter compatible with Sorento engines
- Aftermarket cartridge-style oil filters from trusted brands (such as Bosch, Mann-Filter, Purolator, Wix) that fit Kia/Hyundai canister housings
- Cartridge filter kits that include the filter element and replacement O-ring for the housing
Choosing a reputable brand helps ensure filtration efficiency and proper fit. If you’re unsure which exact part number to order, use a parts retailer lookup with your VIN or ask a Kia service professional for the precise kit for your engine code.
How to replace the oil filter on a 2019 Sorento
Replacing the filter on a canister-style system follows a straightforward sequence, but always consult the service manual for torque specs and gasket replacement guidance. Here is a general outline:
- Warm up the engine, then turn off and disconnect the battery for safety.
- Drain the engine oil from the sump by removing the drain plug and catching the oil in a suitable container.
- Remove the oil filler cap to relieve pressure and improve drainage.
- Unclip or unscrew the oil filter housing cap, depending on your canister design, and remove the old filter cartridge and O-ring.
- Install the new cartridge filter and a fresh O-ring in the housing, then reassemble the cap securely to the specified torque.
- Replace the oil drain plug with a new washer if required, then refill with the correct engine oil type and capacity for your engine.
- Run the engine, check for leaks, and recheck the oil level after a brief idle and final shut-off.
Note: Always use the manufacturer-recommended oil viscosity (commonly 0W-20 or 5W-20 for many Kia engines) and a fresh gasket or O-ring for the housing to prevent leaks.
Oil type, capacity, and maintenance tips
The 2019 Sorento generally requires synthetic engine oil meeting Kia’s specification, with viscosity typically in the 0W-20 or 5W-20 range, though exact requirements vary by engine and market. Oil capacity with a filter change is typically in the 4–5 quart range, depending on engine. Always confirm with the owner’s manual or a dealer for your exact motor and climate.
Tips for choosing parts and avoiding mistakes
To prevent misfit parts or leaks, consider these tips:
- Use a complete oil filter kit that includes the filter element and the housing O-ring.
- Do not reuse old O-rings; replace them with new ones supplied in the kit.
- Dispose of old oil and filters at an appropriate recycle point.
With the proper filter kit and oil, you’ll maintain good filtration and engine longevity for your 2019 Sorento.
Summary
The 2019 Kia Sorento generally uses a canister-style, cartridge-type oil filter housed in a cap-style assembly, with the exact kit determined by engine choice (2.4L or 3.3L) and market. Verify engine code or VIN to select the correct filter, use a genuine Kia/Hyundai or trusted aftermarket cartridge filter, and replace the housing gasket during the change. Do not forget the correct synthetic oil viscosity and proper disposal of used oil.
For any uncertainty, consult your owner’s manual, contact a Kia dealership, or use an online parts lookup by VIN to ensure you order the precise filter kit for your 2019 Sorento. This ensures proper fit, sealing, and filtration performance over the life of the oil change.
What is the oil filter Fram number for the 2019 Kia Sorento?
For 2019-2020 Kia Sorento Oil Filter Fram 19238NHTK 3.3L V6.
How do you tell which oil filter you need?
Find the right oil and oil filter for your car
Please consult your vehicle manufacturer's manual for information specific to your vehicle.
What oil filter does a 2019 Kia Sorento use?
OEZ by Premium Guard – Oil Filter: Ideal for Any Type Oil, Same Filter Installed From The Factory (Part No. 26300-35505) Genuine Hyundai/Kia original equipment oil filter for your Hyundai/Kia vehicle. Engineered and specified by Hyundai/Kia, this is the same filter as that which would be installed by your dealer.
What kind of oil does a 2019 Kia Sorento need?
So, what's the best oil type for the Kia Sorento? The experts in Brandon recommend an oil type with a 5W-20 grade. 5W-20 provides the proper density to keep your motor running. This option should keep the parts of your engine from overheating and prevent excess friction when driving.