Use a standard spin-on oil filter designed for the 1.5-liter engine in the 2013 Honda Fit. Honda Genuine parts such as 15400-PLM-A01 (with revisions) are commonly used, and many reputable aftermarket filters that fit a 3/4-16 UNF thread will work. Always verify the exact part with your VIN or owner's manual.
Understanding the 2013 Fit's oil filter needs
The 2013 Honda Fit typically relies on a 1.5-liter i-VTEC engine that uses a conventional spin-on oil filter rather than a cartridge setup. The filter screws on with a standard 3/4-16 UNF thread, and the gasket size must match to ensure a proper seal. Replacing the filter at every oil change helps protect the engine by maintaining proper filtration and oil pressure.
OEM oil filter options
Here are the Honda Genuine Parts options commonly used on the 2013 Fit. Confirm the exact revision with your VIN, as there were updates during production. The list below covers typical replacement numbers.
- 15400-PLM-A01
- 15400-PLM-A02
Conclusion: Choose the exact Honda part that matches your vehicle’s production year and region. If in doubt, ask a dealer or verify via an official parts catalog using your VIN.
Aftermarket filter options
In addition to OEM parts, many reputable brands offer compatible spin-on filters for the 2013 Fit. Look for filters explicitly listed as compatible with Honda 1.5L engines, and verify the thread size (3/4-16 UNF) and gasket fitment.
- Bosch
- Denso
- Mann-Filter
- Wix
- Purolator
- Fram
Conclusion: Aftermarket filters can be a cost-effective option as long as they meet the correct specifications and gasket requirements. Always cross-check compatibility with the store’s catalog for year, make, model, and engine.
Buying tips and replacement considerations
To ensure a proper fit, confirm the exact part number for your vehicle’s production date and engine code (L15A). Use the correct gasket, and consider replacing the drain plug washer if your service guide recommends it. If you’re unsure, the parts counter can verify suitability by VIN.
Summary
The 2013 Honda Fit uses a standard spin-on oil filter for its 1.5L engine. You can use Honda Genuine Parts (for example, 15400-PLM-A01 and related revisions) or trusted aftermarket filters that match a 3/4-16 UNF thread and proper gasket. Always verify compatibility with your VIN and service manual to ensure a proper fit and reliable oil filtration. Regular replacement at every oil change is recommended for optimal engine protection.