What kind of oil filter does a 2022 Honda Passport take?

The 2022 Honda Passport uses a traditional spin-on oil filter. This is a standard external filter that you replace during routine oil changes on the vehicle’s 3.5-liter V6 engine.

Owners of the Passport should know that this model shares its engine with the Honda Pilot, and both use a conventional spin-on oil filter mounted to the engine block. Replacement can be done with the OEM Honda part or a compatible aftermarket spin-on filter that matches the engine’s thread and gasket size.

Filter type and how to identify it

Before choosing a replacement, it’s helpful to understand what you’re looking for. The Passport uses a spin-on canister oil filter, not a cartridge-style filter. It screws onto a threaded adapter on the engine and uses a gasket to seal against the block. You’ll typically replace it along with the engine oil during service.

Before listing common characteristics, this overview helps you confirm you’re purchasing the correct item for your Passport’s 3.5L V6.



• Spin-on canister design: a metal canister that screws onto the engine with a base plate and gasket.


• Location: typically mounted on the side or bottom of the engine block, accessible from the front of the vehicle.


• Replacement options: OEM Honda filter (part number may read something like 15400-PLM-A01 or its current equivalent) or a reputable aftermarket spin-on filter with the same thread and gasket specifications.


• Compatibility: designed for the 3.5L V6 used in the Passport and Pilot families; verify by engine code (J35-based) if shopping from third-party brands.


• Tools and care: you’ll usually need a filter wrench, a drain pan, and a small amount of fresh oil to lube the gasket on install.

In short, you should look for a conventional spin-on oil filter that matches the Passport’s 3.5L V6 design. Confirm the part fits your exact VIN or engine code if you’re buying from an aftermarket supplier, and ensure you have the correct gasket size and thread pattern.

Replacement options and practical tips

When replacing the filter, you can opt for the genuine OEM filter or a compatible aftermarket spin-on filter. Regardless of the brand, make sure the filter you choose matches the engine’s thread size, base plate, and gasket dimensions. Using the wrong filter can lead to leaks or poor oil filtration.

Helpful guidance before you pick a replacement:



• OEM filter is designed to fit exactly as Honda intends and is typically a reliable choice for long-term maintenance.


• Aftermarket spin-on filters from major brands (e.g., Wix, Bosch, Purolator, Motorcraft) are commonly available and can offer equivalent performance if they match the correct specifications.


• When installing, lubricate the new filter’s gasket with a thin film of clean engine oil and hand-tighten, then give a final snug turn per the manufacturer’s guidelines (usually an additional 3/4 to 1 turn).


• Always verify the vehicle’s owner’s manual or a trusted parts catalog for the exact filter specification for your VIN, especially if you’re buying online or at a different market.

Choosing the right filter and installing it correctly helps protect the engine and maintain oil pressure and filtration efficiency over time.

How to replace the oil filter on a 2022 Passport

If you’re performing the oil change yourself, follow these general steps. The process is straightforward for a spin-on filter, but always consult your manual for any model-year specifics.

1. Prepare your workspace: run the engine briefly to warm the oil, park on a level surface, engage the parking brake, and gather the necessary tools and a drain pan.


2. Position the drain pan under the oil filter area and place rags around the work area to catch spills.


3. Using an appropriate filter wrench, loosen and remove the old filter. Let any remaining oil drain from the filter opening.


4. Remove the old gasket from the mounting surface and wipe the area clean with a rag. Inspect the mounting surface for damage or debris.


5. Prepare the new filter by applying a light coat of fresh engine oil to the gasket. Install the new filter by hand until it seats, then give it an additional 3/4 to 1 turn as recommended by the filter manufacturer.


6. If you’re also performing an oil change, replace the drain plug’s gasket, refill the engine with the recommended oil amount, and check for leaks around the filter and drain plug. Start the engine and verify oil pressure and absence of leaks; recheck the oil level after a few minutes of idle.

Note: If you’re only replacing the filter (not changing the oil), you’ll still want to ensure the old oil is not contaminated and that the new filter is properly seated to prevent leaks.

Summary

The 2022 Honda Passport takes a conventional spin-on oil filter for its 3.5L V6 engine. You can use the OEM Honda filter or a compatible aftermarket spin-on that matches the correct thread and gasket size. Replacement is straightforward with standard tools, and it pairs with the vehicle’s oil-change schedule. When in doubt, verify fitment for your VIN and consult the owner’s manual for exact service intervals and torque guidelines.