The 2017 Honda Accord uses a cartridge-style oil filter housed in a removable housing rather than a traditional spin-on canister. The exact cartridge type depends on the engine installed (1.5-liter turbo or 2.0-liter turbo), so you should verify the precise part by checking your VIN or the owner's manual.
Engine options for the 2017 Accord
The 2017 Accord offered two engines, both employing a cartridge-style oil filter inside a housing. Identifying the correct filter requires knowing which engine your car has.
- 1.5-liter turbocharged inline-4 (L15B7)
- 2.0-liter turbocharged inline-4 (K20C2)
Both variants use the cartridge-style setup, so the replacement involves the internal filter element and seals rather than a large external canister. Always verify the exact filter element and O-rings for your specific engine and VIN.
How to replace the filter on a 2017 Accord
If you’re performing the maintenance yourself, here is a general guide to replacing the cartridge-style oil filter inside the housing.
- Gather supplies: a new filter element, new O-rings/gasket kit, the correct oil grade and quantity, a drain pan, rags, gloves, and the appropriate tools.
- Warm up the engine, then lift and secure the vehicle and place a drain pan under the oil pan to remove old oil.
- Loosen and remove the oil filter housing cap to access the internal cartridge.
- Remove the old cartridge, inspect the housing, and install the new cartridge with fresh O-rings or gasket as directed by the kit instructions.
- Reinstall the housing cap, torque per manufacturer guidance, and refill with the recommended oil volume.
- Start the engine, check for leaks, and reset the oil-change indicator if applicable.
Dispose of used oil and the old filter properly at an authorized recycling facility or service center.
Finding the exact oil filter part number for your Accord
Part numbers for the cartridge-style filter vary by engine and VIN, so use one of the following methods to confirm the correct part.
- Look up the filter element by VIN on Honda’s official parts site or consult a dealership with your VIN on file.
- Check the owner’s manual or service manual for the specified filter type and part number.
- When buying aftermarket, use a cross-reference that matches the 1.5L turbo (L15B7) or 2.0L turbo (K20C2) cartridge-style filter for Honda engines.
Always verify the exact part number before purchasing to ensure compatibility with your engine variant.
Summary
The 2017 Honda Accord uses a cartridge-style oil filter inside a housing, not a traditional spin-on canister. The correct cartridge depends on whether the car has the 1.5L or 2.0L turbo engine, so VIN-based verification is recommended. Replacement involves swapping the internal filter element and O-rings and following standard oil-change procedures, with proper disposal of used oil and parts. For the exact part number, consult the dealer or an authorized parts retailer using your VIN.