The Dodge Journey SXT typically uses 5W-20 synthetic motor oil, though the exact grade can vary by engine and climate. Always verify with your owner's manual or a dealer for your specific year and engine variant.
Engine Variants and Oil Requirements
Two engines powered the Journey SXT during its production run: a 2.4L World Gas Engine (I4) and a 3.6L Pentastar V6. While both commonly call for a light synthetic oil, the precise viscosity and specifications can depend on the model year and operating conditions. The following outlines typical guidance by engine.
3.6L Pentastar V6
For the 3.6L Pentastar V6, manufacturers frequently specify 5W-20 synthetic (or synthetic blend) oil that meets API SN or newer standards, with Chrysler’s MS-6395 specification often cited by Mopar guidelines. This viscosity is standard across most Journey models equipped with this engine. In some markets or model years, alternatives may be listed, so it’s important to confirm with the manual.
- Viscosity: 5W-20 (synthetic preferred) for the majority of climates.
- Specification: API SN or newer; ILSAC GF-5 or newer; Chrysler MS-6395 commonly cited.
- Oil type: Synthetic or synthetic-blend as recommended by the manual.
Using the recommended oil helps ensure optimal performance and supports warranty requirements for the V6 powertrain.
2.4L World Gas Engine
The 2.4L World Gas Engine in many Journey SXT models also calls for 5W-20 synthetic oil, with similar API/ILSAC specs and MS-6395 guidance. Some model years or climates may allow 5W-30 as an alternative; always verify with the manual for your specific vehicle.
- Viscosity: 5W-20 (synthetic or synthetic-blend depending on manual).
- Specification: API SN or newer; ILSAC GF-5 or newer; MS-6395 compatibility as per Mopar guidelines.
- Oil type: Synthetic or synthetic-blend as specified by your manual.
As with the V6, following the approved oil specification supports engine longevity and warranty coverage.
How to Verify the Exact Oil Specification for Your Journey SXT
Because the Journey’s oil requirements can vary by year, engine, and region, it’s best to confirm using official documentation and the vehicle’s identifiers.
- Check the owner’s manual for the exact viscosity and specification (for example, 5W-20, API SN or newer, MS-6395).
- Inspect the engine oil fill cap or any under-hood labels for the viscosity grade and spec code.
- Look at the driver’s door placard for the recommended oil grade and specification specific to your vehicle.
- If you’re unsure, contact a Dodge/Chrysler dealer or a certified technician with your VIN for precise guidance.
Verifying these details helps ensure you use the correct oil for your engine, climate, and warranty considerations.
Summary
In practice, the Dodge Journey SXT most often requires 5W-20 synthetic motor oil, applicable to both the 2.4L I4 and the 3.6L V6 engines. Always confirm the exact specification in your vehicle’s manual or with a dealer, especially if you live in extreme temperatures or have a different model year. Adhering to the recommended viscosity and MS-6395/API standards helps maintain performance and warranty protections.
What oil does a 2015 Dodge Journey SXT take?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
Can you put 5W-30 in a Dodge Journey?
Valid thru 5/4 on 5-qt. jug.
What kind of oil does a Dodge Journey 3.6 take?
5w20
Genuine Mopar Engine Oil Change Kit 2014 Dodge Journey 3.6L V6 engine oil 5w20.
What kind of oil does a Dodge Journey SXT take?
Valvoline – High Mileage 5W-30 Full Synthetic Engine Oil, Prevents Leaks (Part No. 881169)