The 2014 Honda Accord uses 0W-20 synthetic motor oil. Both the 2.4L four-cylinder and the 3.5L V6 engine options call for this viscosity and grade, and the oil should meet Honda’s specifications as well as API certification.
In more detail, the Accord’s 2014 model year offered two engines—the 2.4-liter inline-4 and the 3.5-liter V6—and both share the same oil requirement: 0W-20 synthetic oil that meets API standards and ILSAC GF-5 (or higher). The typical oil capacity with a filter is about 4.4 quarts, and maintenance intervals follow standard guidelines: approximately every 7,500 miles under normal driving, with more frequent changes under severe conditions.
Oil specifications for the 2014 Accord
This section lists the key characteristics you should look for when selecting oil for the car.
- Viscosity: 0W-20
- Oil type: Synthetic engine oil (Honda-approved; full synthetic is commonly used)
- Certifications: API-certified (SN/SM or newer) and ILSAC GF-5 or higher
In short, choose a 0W-20 synthetic oil that meets the API and ILSAC specifications recommended by Honda.
Engine options in 2014
The 2014 Accord was offered with a 2.4L inline-4 and an optional 3.5L V6. Regardless of engine choice, the required oil specification remains 0W-20 synthetic.
Oil capacity and maintenance intervals
Before listing the specifics, note the typical capacity and service schedule for the 2014 Accord.
- Oil capacity (with filter): About 4.4 quarts (approximately 4.2 liters)
- Oil change interval: About every 7,500 miles under normal driving; about every 3,750 miles under severe driving conditions
Always verify the exact capacity for your trim and engine via the owner's manual and check the oil level with the dipstick after filling to ensure proper level.
Summary
The 2014 Honda Accord uses 0W-20 synthetic motor oil for both engine options, with an approximate capacity of 4.4 quarts (with filter). Follow the standard maintenance interval of 7,500 miles under normal conditions or 3,750 miles under severe conditions, and ensure the oil meets API and ILSAC GF-5 standards as recommended by Honda.