What kind of oil does a 2.4 L Dodge Avenger take?

The Dodge Avenger with a 2.4 L engine typically uses 5W-20 oil (synthetic blend or full synthetic) that meets Chrysler MS-6395, with API SN/ILSAC GF-5. In hot climates, 5W-30 is commonly acceptable, but always verify your exact model/year in the owner’s manual.

The question covers variations across model years and market regions. The Avenger’s 2.4 L engine is part of Chrysler’s World Engine family, and oil requirements can differ slightly by year and weight of operation. This guide outlines the standard guidance and how to confirm the exact specification for your car.

Recommended oil grades

These are the typical viscosity options you’ll encounter, along with the specification they should meet. Use the owner’s manual for your exact year to confirm allowances.

• 5W-20 synthetic blend or full synthetic that meets Chrysler MS-6395 and API SN/ILSAC GF-5.


• 5W-30 may be acceptable in hot climates or under heavy-load conditions if permitted by your manual, as long as it meets MS-6395 and API specs.

Choosing between 5W-20 and 5W-30 depends on climate, driving conditions, and the vehicle’s year. For typical daily commuting, 5W-20 is the standard starting point; 5W-30 is reserved for specific conditions per the manual.

Oil specifications to look for on the bottle

When shopping for oil, check that the container lists the correct viscosity and industry certifications. Key specifications to verify are:

• Viscosity grade: 5W-20 is standard; 5W-30 may be allowed in certain scenarios as noted by the manual.


• API service classification: SN or newer (e.g., SP or SN+), indicating modern protection standards.


• Chrysler MS-6395 specification: Ensures compatibility with Chrysler/Fiat engines and sealing systems.

To ensure optimal protection, choose a reputable brand and an oil that meets MS-6395, with at least API SN or newer. Synthetic or synthetic-blend oils are often preferred for modern engines and longer drain intervals.

Practical notes and maintenance tips

Oil capacity and change intervals vary by model year and driving conditions. Refer to your owner’s manual for the exact capacity and the recommended drain interval. In routine driving with synthetic oil, intervals can often extend beyond conventional limits, but more frequent changes may still be prudent for severe conditions or high-mileage engines.

Always replace the oil filter with every oil change and reset any oil-life monitor if your vehicle is equipped with one.

Summary

For most Dodge Avenger models with the 2.4 L engine, use 5W-20 oil that meets Chrysler MS-6395 and API SN/ILSAC GF-5; 5W-30 is permissible in certain climates or conditions if allowed by the manual. Always confirm the exact grade and specifications for your year and region via the owner’s manual or the under-hood label, and choose a reputable brand. Regular oil changes help maintain engine longevity.

Can I use 5W-30 instead of 5W20 in my Dodge?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.

How many quarts does a 2.4 l Dodge Avenger take?

4.5 quarts
The 2.4L inline engine typically requires approximately 4.5 quarts of oil with a filter change; exact fill is confirmed during service.

What kind of oil does a Dodge Avenger 2.4 take?

5W-20
2010 Dodge Avenger 2.4L Complete Oil, Air & Cabin Filter Kit (5W-20)

What kind of oil does a 2010 Dodge Avenger 2.4 L take?

5W-20
Oil Grade: SEO11