The engine uses Dexos1 Gen 2 synthetic motor oil with a viscosity of 0W-20.
Understanding the 2.0L Equinox oil specification
The 2020 Equinox with the 2.0-liter turbocharged engine requires motor oil that carries GM's Dexos1 Gen 2 approval, and a viscosity of 0W-20. This combination supports turbo performance, cold-weather starts, and fuel efficiency while protecting emissions systems. Always verify the exact specification in the owner's manual or on the GM service site for your vehicle's VIN, as oil requirements can vary by market or engine variant.
What Dexos1 Gen 2 0W-20 means for you
Dexos1 Gen 2 is GM's certification that ensures the oil meets the engine's tolerance, protection, and emissions-control needs. The 0W-20 grade is chosen to improve cold-start performance in cool climates and optimize fuel economy.
Before you read the list below, note these are the essential guidelines to follow when selecting and changing the oil. The exact quantity and change interval may vary by model year, climate, and driving conditions.
- Oil type: Dexos1 Gen 2 approved motor oil
- Viscosity: 0W-20
- Oil form: synthetic motor oil (full synthetic recommended)
- Do not use oils that are not Dexos1 Gen 2 approved or that are conventional oils unless GM specifies otherwise
- Oil capacity: approximately 5 quarts with filter
- Recommended change interval: follow GM’s oil-life monitor; typical synthetic interval is about 5,000–7,500 miles depending on driving conditions
Conclusion: For the 2020 Equinox 2.0L turbo, stick with Dexos1 Gen 2 approved 0W-20 synthetic oil, and follow the GM oil-life monitor for changes. Always consult your owner's manual for the exact specification and capacity for your VIN.
Summary
In short, the 2020 Chevy Equinox 2.0L uses Dexos1 Gen 2 synthetic motor oil with a 0W-20 viscosity, typically around 5 quarts, with changes guided by GM's oil-life system. Always verify the exact spec in your owner's manual and on GM’s service resources for your specific vehicle.