The 2019 Honda HR-V takes 0W-20 full-synthetic motor oil.
The HR-V uses a 1.8-liter i-VTEC engine, and Honda specifies a 0W-20 viscosity for optimal efficiency and protection. The engine oil capacity is roughly 3.7 quarts (3.5 liters) with a filter. For best results, use oil that meets API SN or higher and ILSAC GF-5 standards, with Honda Genuine 0W-20 oil being the most straightforward option. Always consult the owner’s manual or your local dealer to confirm the exact specification for your market and trim.
Understanding the Oil Specification
Viscosity grade and quality standards determine how the oil protects the engine across temperatures. In the 2019 HR-V, 0W-20 is chosen to balance cold-start performance with high-temperature protection, contributing to fuel efficiency and reduced engine wear.
Tips for selecting the right oil include choosing a 0W-20 product that is API SN or higher and ILSAC GF-5 compliant. Honda Genuine oils are formulated to meet the specific tolerances of Honda engines, but many third-party brands with the same specification will work as well.
Oil Capacity and Maintenance Notes
When performing an oil change, plan for about 3.7 quarts (3.5 liters) of oil with a new filter. Refill carefully to the recommended level using the dipstick, and reset the maintenance minder if applicable. For synthetic oil, service intervals are typically longer than conventional oil, but always follow Honda’s guidance for your vehicle’s mileage and usage conditions.
In summary, for the 2019 HR-V, 0W-20 full-synthetic motor oil is the recommended choice, with a capacity around 3.7 quarts with filter. Always verify the exact specification and capacity in the owner’s manual or with a Honda dealer, especially if you’re outside the U.S. market where minor variations can occur.
How to Choose and Use the Right Oil
Before selecting oil, consider the following guidelines to ensure compatibility and performance:
- Use 0W-20 viscosity as the baseline for the 1.8L engine.
- Choose a full-synthetic oil, or a high-quality synthetic blend if a full synthetic isn’t available, that meets API SN or higher and ILSAC GF-5 standards.
- Prefer Honda Genuine 0W-20 or an equivalent that explicitly meets Honda’s specifications.
- Check your owner’s manual for the exact oil capacity and change interval for your climate and driving conditions.
Following these guidelines helps maintain engine efficiency, performance, and warranty coverage where applicable.
Market Variations and Verification
Oil specifications can vary by market. While 0W-20 full-synthetic is standard for many regions, always confirm the exact requirement for your vehicle’s VIN and local regulations with your dealer or in the manual. If you’re unsure, bring a sample of your current spec oil or your vehicle’s documentation to ensure compatibility.
Summary
The 2019 Honda HR-V uses 0W-20 full-synthetic motor oil, with an approximate capacity of 3.7 quarts (3.5 liters) including a filter. Use oil that meets API SN or higher and ILSAC GF-5, with Honda Genuine 0W-20 being a reliable option. Always verify the specification for your specific market and consult the owner’s manual for maintenance intervals and exact capacity.
What type of oil goes in a 2019 Honda HRV?
AMSOIL 0W-20 100% Synthetic High-Mileage Motor Oil.
Is Honda 0W-20 oil full synthetic?
HONDA FULL SYNTHETIC 0W20 is formulated with synthetic base stocks that provide enhanced performance benefits compared with conventional engine oils.
Which oil is best for Honda HR-V?
Mobil 1 – Advanced 0W-20 Full Synthetic Engine Oil, Improves Fuel Economy, 1 Quart (Part No. 44968) Keep your engine running at peak efficiency while improving fuel economy.
Does my Honda HR-V need synthetic oil?
Can I use conventional oil instead of synthetic in my HR-V? While it's possible in an emergency, Honda recommends synthetic or synthetic blend 0W-20 oil for optimal performance and engine protection.