The 2019 Honda Fit uses SAE 0W-20 synthetic motor oil. This is the standard specification for the 1.5-liter engine in that model year.
Honda specifies 0W-20 oil that meets API SN or newer and ILSAC GF-5 standards, with either a full synthetic or synthetic-blend formulation acceptable as long as it satisfies those specs. Using the recommended oil supports fuel economy, cold-weather performance, and long-term engine protection. Always consult the owner's manual for the exact requirements in your region and trim level.
Oil specifications and acceptable types
Before selecting oil, here are the key specs to keep in mind for the 2019 Fit.
- Viscosity: 0W-20 is recommended across climates for the 1.5L engine, aiding cold starts and overall lubrication.
- Certification: Oil must meet API SN or newer and ILSAC GF-5 (or newer) standards.
- Oil type: Full synthetic or synthetic-blend oils that meet the above standards are acceptable.
- Branding: If possible, choose a reputable brand that clearly states 0W-20 and compliance with API SN/ILSAC GF-5.
Conclusion: Use a 0W-20 oil that is API SN or newer and ILSAC GF-5 compliant; either a full synthetic or synthetic-blend is acceptable when it meets those specs.
Oil capacity and change intervals
For planning maintenance, here is what to know about how much oil the engine holds and when to change it.
- Oil capacity (with filter): roughly 3.4 quarts (about 3.2 liters). Exact capacity can vary by market and engine variant, so check the service manual or your dipstick for the precise figure.
- Oil change interval: typically around every 7,500 miles (12,000 km) under normal driving, with more frequent changes recommended under severe conditions or extreme climates. Refer to the maintenance minder or owner's manual for the recommended interval in your situation.
Conclusion: When performing an oil change, replace the filter and fill to the correct level. After adding oil, let it settle, then verify the level with the dipstick to ensure proper oil quantity.
Summary
In brief, the 2019 Honda Fit calls for 0W-20 synthetic motor oil (full synthetic or synthetic-blend) that meets API SN or newer and ILSAC GF-5. The engine holds about 3.4 quarts of oil with the filter, and typical changes are advised every 7,500 miles under normal driving. Always confirm exact specifications and capacity in the owner’s manual or from a Honda service advisor.