Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What kind of oil does a 2019 Honda Accord take?

The 2019 Honda Accord uses synthetic 0W-20 engine oil. This viscosity covers both the 1.5-liter turbo and the 2.0-liter turbo engines, and you should choose a synthetic oil that meets API SN or newer and ILSAC GF-5 or GF-6 specifications. The approximate capacity is about 4.4 quarts with a new filter, and oil changes should follow Honda’s maintenance minder guidance.


Oil specifications for the 2019 Accord


Here is what to know about the oil grade, compatibility and engine variations in the 2019 Accord.


1.5L turbocharged engine


The 1.5-liter turbo engine in the 2019 Accord uses SAE 0W-20 synthetic oil. Use an oil that meets API SN or newer and ILSAC GF-5 or GF-6 standards. The approximate capacity with a new filter is around 4.4 quarts (4.2 liters); always verify using the dipstick and owner's manual. For best results, use Honda Genuine Synthetic 0W-20 or an equivalent from a reputable brand.


2.0L turbocharged engine


The 2.0-liter turbo engine also requires SAE 0W-20 synthetic oil and the same API/ILSAC specifications. Oil capacity is similar in range and depends on the exact filter setup, but around 4.4 quarts with filter is common; consult the owner’s manual for the precise figure for your vehicle. Use a high-quality synthetic 0W-20 that meets API SN or newer and ILSAC GF-5/GF-6.


Practical considerations for buying and changing oil


Before listing the key specs, here's a quick guide to what to look for when purchasing oil and planning a change.



  • Viscosity: 0W-20 is standard for the 2019 Accord's engines.

  • Oil type: Synthetic oil is required or strongly recommended; synthetic blends are generally acceptable only if they meet the required spec.

  • Certification: Look for API SN or newer and ILSAC GF-5 or GF-6; avoid oils that do not meet these specs.


Choosing the right oil ensures proper lubrication, fuel economy, and engine longevity. If in doubt, consult the owner’s manual or a Honda service advisor.


Oil change basics and maintenance notes


To help with routine maintenance, keep these points in mind about oil changes for the 2019 Accord.



  • Oil capacity is roughly 4.4 quarts with the filter; actual capacity varies slightly by engine variant and filter type.

  • Change intervals are typically guided by Honda’s maintenance minder system and may be shortened under severe driving conditions.

  • Always replace the oil filter when changing the oil, and use a genuine Honda oil drain plug washer if equipped.


Regular oil changes with the correct oil type help maintain engine performance and reliability over time.


Summary


The 2019 Honda Accord runs on synthetic 0W-20 oil, suitable for both the 1.5L and 2.0L turbo engines. Use an oil that meets API SN or newer and ILSAC GF-5/GF-6, about 4.4 quarts with a filter, and follow the maintenance minder for intervals. When in doubt, refer to the owner's manual or a Honda dealer for confirmation.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.