The 2019 Chrysler 300 uses synthetic motor oil, with the exact viscosity depending on the engine. The 3.6L Pentastar V6 typically requires 0W-20, while the available Hemi V8 engines (5.7L and, in some trims, 6.4L) use 5W-20. Always verify the specification for your specific vehicle configuration.
Engine oil by engine type
Use this quick guide to match your engine to the correct oil viscosity and specification.
- 3.6L Pentastar V6 — 0W-20 synthetic oil (meets Chrysler MS-6395; API SN or newer)
- 5.7L Hemi V8 — 5W-20 synthetic oil (meets Chrysler MS-6395; API SN or newer)
- 6.4L Hemi (in higher-performance trims) — 5W-20 synthetic oil (meets Chrysler MS-6395; API SN or newer)
In all cases, use a high-quality synthetic oil that meets Chrysler MS-6395 and is suitable for your climate. If you’re unsure which engine your car has or how it’s configured, consult the owner’s manual or a Chrysler dealer to confirm the exact specification.
How to confirm the correct oil for your vehicle
Follow these steps to be sure you’re using the right oil for your 2019 Chrysler 300.
- Check the owner’s manual for the exact viscosity and specification required for your engine.
- Look at the under-hood oil fill cap or the oil information label on the engine bay for the recommended viscosity (0W-20 or 5W-20) and specification (MS-6395).
- If you’re unsure of your engine type, verify it by checking the vehicle’s VIN or asking a Chrysler dealer or service portal.
- Use only full-synthetic oil that meets Chrysler MS-6395 and is API SN or newer for optimal protection and warranty compatibility.
Following these steps helps ensure you’re using the correct oil for your exact engine configuration and local conditions.
Summary
For a 2019 Chrysler 300, the oil type depends on the engine. The 3.6L Pentastar V6 typically requires 0W-20 synthetic oil, while the 5.7L and 6.4L Hemi V8 engines use 5W-20 synthetic oil. Always verify with the owner’s manual or a dealer, and use oil that meets Chrysler MS-6395 and API SN or newer.