The 2019 Camry XSE uses SAE 0W-20 synthetic motor oil. This grade applies to both available engines in the XSE: the 2.5L four-cylinder and the 3.5L V6. For precise capacity and change intervals, consult the owner's manual or the oil cap on your engine.
Oil specifications by engine
2.5L four-cylinder engine
Here are the oil specifications typically recommended for the 2.5L engine paired with the 2019 Camry XSE.
- Oil grade: 0W-20 synthetic (full synthetic)
- Spec/recallable standards: API SN or newer; ILSAC GF-5 or newer
- Approximate capacity (with filter): about 4.5–4.7 quarts
In summary, the 2.5L engine in the 2019 Camry XSE requires 0W-20 synthetic oil and roughly 4.5–4.7 quarts per change, with exact figures provided in the owner's manual.
3.5L V6 engine
The V6 option in the 2019 Camry XSE uses the same 0W-20 synthetic oil grade, though oil capacity is higher due to the larger engine.
- Oil grade: 0W-20 synthetic (full synthetic)
- Spec/recallable standards: API SN or newer; ILSAC GF-5 or newer
- Approximate capacity (with filter): roughly 5.5–6.0 quarts
In short, the V6-equipped XSE also calls for 0W-20 synthetic oil, with a larger oil capacity than the four-cylinder variant. Always verify the exact amount in your manual or on the oil fill cap.
Maintenance notes
Regardless of engine, use 0W-20 synthetic oil and follow the maintenance schedule in the owner’s manual for oil change intervals and capacity. If you live in extreme climates or have heavy driving conditions, consult a Toyota service guide or dealer for any recommended adjustments.
Summary
The 2019 Camry XSE takes SAE 0W-20 synthetic motor oil for both the 2.5L four-cylinder and the 3.5L V6 engines. Expect about 4.5–4.7 quarts for the four-cylinder and around 5.5–6.0 quarts for the V6, with exact figures provided by Toyota’s official documentation. Always confirm via the owner's manual or your vehicle’s oil fill cap.