Most 2017 Audis require a fully synthetic motor oil that meets Volkswagen Group specifications, with the exact viscosity depending on the engine. Common choices are 5W-30 or 5W-40, though some engines tolerate 0W-20, 0W-30, or 0W-40.
The 2017 model year encompasses a wide range of engines across several models (A3, A4, A5, Q5, Q7, and more). Because oil requirements vary by engine code and market, the safest approach is to verify the exact specification from the owner's manual, the engine’s oil cap, or Audi’s official service resources. The following guide lays out the general rules, how to confirm your engine’s needs, and common oil options used in 2017 Audis.
Oil specifications to look for
Understanding the specification families
In practice, you’ll encounter Volkswagen Group oil specifications that indicate compatibility with your engine. The most common families seen on 2017 Audis are listed below.
- VW 502.00 — a long-standing petrol-engine specification still found on some older or non-long-life engines.
- VW 504.00 / 507.00 — long-life, low-SAPS oils used in many modern Audi engines (both petrol and diesel) that employ extended service intervals and/or particulate filters.
Oils that carry these approvals are typically synthetic and paired with viscosity options like 0W-30, 0W-40, 5W-30, or 5W-40, depending on the engine and climate.
How to confirm the exact oil for your engine
Steps to pin down the right specification
Use these steps to determine the exact oil requirement for your specific 2017 Audi model and engine.
- Consult the owner's manual or the service booklet for the exact oil specification and viscosity recommended for your engine.
- Check the oil filler cap; some caps list the required specification (for example, VW 504 00 / 507 00).
- Use Audi’s official service portal or contact a dealer with your VIN; the VIN reveals the engine code and the precise oil requirement.
- Choose oils that carry the approved VW/Audi marks (such as VW 504 00 / 507 00 or the specific engine-approved equivalent) and a compatible viscosity.
Verifying through official sources ensures you meet the factory’s requirements and maintain any applicable warranty or maintenance plan.
Common oil viscosities you might see for 2017 Audis
Viscosity options by engine and region
Viscosity is influenced by engine design, climate, and the intended service interval. Here are typical examples seen in 2017 Audis, though your exact choice should come from the manual or dealer guidance.
- 0W-30 or 0W-40 — frequently used for newer engines and European markets with longer service intervals.
- 5W-30 or 5W-40 — widely used for turbocharged petrol engines and many diesel engines in the lineup.
- 0W-20 — used by some smaller or highly efficient engines in certain markets.
Always pair the chosen viscosity with the correct VW/Audi specification to ensure proper protection and performance.
Summary
For a 2017 Audi, there isn’t a single universal oil. The right choice depends on your exact engine code and market. In most cases, use a fully synthetic motor oil that meets Volkswagen Group specifications, typically VW 504.00/507.00 for many modern engines, or VW 502.00 for certain older petrol engines. Confirm the precise viscosity (often 5W-30, 5W-40, or occasionally 0W-30/0W-40) from the owner’s manual, the oil cap, or Audi’s service portal, and adhere to the recommended service interval. When in doubt, consult your local Audi dealer or a qualified technician to confirm the correct oil for your VIN.