The 2016 Honda Accord generally uses 0W-20 full-synthetic engine oil, meeting API SN or newer. Always verify with your owner’s manual or the under-hood label for your specific trim.
Oil type and viscosity for the 2016 Accord
Honda’s official guidance for this model year calls for 0W-20 synthetic oil. The specification is designed to optimize fuel efficiency and engine protection across the available engines.
The recommended oil type by engine variant is 0W-20 full synthetic, API SN or newer. This applies to both 2.4L and 3.5L engines unless the manual states otherwise.
- 2.4-liter inline-4 engine: 0W-20 full synthetic oil (API SN or newer).
- 3.5-liter V6 engine: 0W-20 full synthetic oil (API SN or newer).
Always double-check the owner’s manual or the under-hood label to confirm the exact viscosity and specification for your vehicle.
Maintenance and change intervals
Oil changes in the 2016 Accord follow Honda's maintenance minder system, which schedules changes based on driving conditions and engine needs. With synthetic oil, many owners receive longer intervals than conventional oil, but exact timing varies. Replace the oil filter at each change and use the recommended 0W-20 oil.
Where to find official guidance
Owner's manual: The definitive source for your exact trim and engine code. It lists the required viscosity and oil specification. Under-hood label: A sticker on the engine bay often shows the required oil viscosity.
Tips and considerations
When using a different viscosity due to extreme temperatures, ensure it is approved by Honda and meets API SN or newer. Stick to 0W-20 unless the manual explicitly allows an alternative.
Summary
In short, a 2016 Honda Accord typically uses 0W-20 full synthetic engine oil that meets API SN or newer, for both the 2.4L four-cylinder and the 3.5L V6 variants. Verify with the owner’s manual or under-hood label, and follow the maintenance minder for oil-change intervals.