The 2016 Ford Fusion 2.0 EcoBoost uses SAE 5W-20 engine oil, and you can use either synthetic blend or full synthetic oil that meets Ford’s specifications.
Beyond the viscosity, choose oil that meets API SN or newer and ILSAC GF-5 specifications. The engine’s oil capacity is approximately 5.7 quarts with a filter. Always refer to the owner’s manual or your dealer for climate-specific guidance and the exact capacity.
Recommended oil types and standards
Below is a quick guide to acceptable oil types and the standards they should meet for the 2.0 EcoBoost engine.
- SAE 5W-20 synthetic blend that meets API SN/SN+ and ILSAC GF-5 specifications
- SAE 5W-20 full synthetic that meets API SN/SN+ and ILSAC GF-5 specifications
- Any brand that meets Ford’s specifications for the 2.0 EcoBoost (Motorcraft or equivalent) and API SN/SN+ with ILSAC GF-5
Using the correct oil type and standards helps protect the engine, maintain fuel efficiency, and support proper oil-change intervals.
Oil capacity and practical notes
Before making a purchase, note these practical details to ensure proper service and avoid over- or under-filling.
- Oil capacity is roughly 5.7 quarts (with a filter).
- Ford-approved options include Motorcraft 5W-20 or any equivalent that meets Ford’s spec and API SN/SN+ with ILSAC GF-5.
- While 5W-20 is the standard recommendation for the Fusion 2.0, always consult the owner's manual for climate-specific guidance or any approved alternatives (such as 5W-30) as directed by Ford for severe conditions.
Understanding these details helps ensure the correct lubricant is used and the engine stays well protected across seasons.
Summary
For the 2016 Ford Fusion 2.0 EcoBoost, use SAE 5W-20 oil (synthetic blend or full synthetic) that meets API SN/SN+ and ILSAC GF-5. The engine capacity is about 5.7 quarts with a filter, and you should choose Motorcraft or an equivalent brand that meets Ford specifications. Always verify the exact requirements in the owner's manual and follow the recommended change intervals.
Can I use 5W30 instead of 0W20?
Modern engines designed for 0W-20 oil require specific viscosity for optimal performance, and using thicker 5W-30 oil may compromise efficiency while potentially voiding manufacturer warranties.
What oil does Ford recommend for a 2.0 EcoBoost?
Example: The image below shows that a 2021 to 2024 2.0L EB Bronco Sport vehicle takes SAE 5W-30 Motorcraft oil, has a 5.5-quart capacity, and uses a Motorcraft FL910S oil filter.
What oil does a 2016 Ford Fusion 2.0 take?
Ford Fusion Oil Type
For modern Ford Fusion sedans, the manufacturer suggests SAE 5W-20 or SAE 5W-30 Motorcraft full synthetic oil for the gasoline engine. If you own a Ford Fusion hybrid, Ford recommends SAE 0W-20 oil that works for lower temperatures.
Do Ford Fusions shift hard?
It is a good idea to keep an eye and ear on the way your car sounds when you are accelerating, as the RPMs should never get so high that they are noticeable. Ford Fusion transmissions are also known for hard shifting issues.