The 2014 Honda CR-V requires 0W-20 synthetic motor oil (API SN or newer). Use Honda Genuine oil or an equivalent that meets API standards.
The 2014 CR-V uses a 2.4-liter engine and is designed to operate best with 0W-20 oil. This viscosity supports fuel efficiency and reliable cold starts. The exact capacity and regional variations can differ, so check the owner's manual or the under-hood sticker for your specific vehicle.
Recommended oil type and viscosity
Engine oil for the 2014 CR-V should be 0W-20. This viscosity is specified to optimize efficiency and performance across typical driving conditions. While regional manuals may have slight wording differences, 0W-20 is the standard requirement for most markets.
Quality and specifications
Use API SN or newer oil. Honda recommends Honda Genuine oil, but any high-quality synthetic oil meeting the API standard and 0W-20 viscosity is acceptable. Avoid mixing oil grades or using oils that do not meet the specification.
Capacity and service considerations
Oil capacity with filter change is approximately 4.7 quarts (about 4.4–4.7 L, depending on market). Replace the oil filter at each change. The Honda Maintenance Minder system will indicate when an oil change is due based on driving conditions, so follow its guidance alongside the manual’s baseline intervals.
Change intervals and practical tips
With synthetic 0W-20 and normal driving, many CR-V owners follow oil-change intervals around 7,500 miles (12,000 km) or longer, but intervals vary with climate and driving style. Always refer to the owner's manual and the maintenance minder for your vehicle’s recommended schedule.
Regional notes and quick reference
Oil specifications can vary by country. If you’re outside the United States or buying a used vehicle, verify the exact recommendation in your local owner's manual or with a Honda dealer to ensure you’re using the correct grade for your exact model and market.
Summary
For a 2014 Honda CR-V, use 0W-20 synthetic motor oil (API SN or newer), ideally Honda Genuine or an equivalent that meets API standards. The approximate oil capacity with filter is 4.7 quarts. Always follow the Maintenance Minder guidance and consult the manual for region-specific details.