The 2014 Honda Accord LX requires 0W-20 viscosity engine oil, typically full synthetic, and it takes about 4.5 quarts with a filter.
In 2014, the LX’s 2.4-liter engine is designed to run on 0W-20 oil that meets API SN or newer and ILSAC GF-5 specifications. Using the recommended oil helps optimize fuel economy and engine protection. The sections below detail the grade/specs, capacity, and maintenance notes.
Oil grade and specifications
Here's what to look for when selecting oil for the 2014 Accord LX:
- 0W-20 viscosity (suitable for cold starts and year-round operation)
- API SN or newer performance specification
- ILSAC GF-5 certified (GF-6-compatible oils are newer; ensure compatibility)
- Full synthetic or synthetic-blend oil is acceptable, with full synthetic recommended for maximum protection and longevity
Using oil that meets these specifications helps maintain efficiency and protection, and aligns with Honda's factory recommendations.
Variant note
On the 2014 Accord lineup, the LX trim uses the 2.4-liter four‑cylinder engine; higher trims offering different engines (such as a V6) may have separate oil capacity or viscosity considerations. Always consult the owner's manual for your exact vehicle to confirm specifications.
Choosing the correct grade and spec supports performance, fuel economy, and warranty compliance.
Oil capacity and change considerations
Next, the key numbers and practices you should know when performing an oil change:
- Oil capacity: approximately 4.5 quarts (with filter)
- Always replace the oil filter with a new one during every change
- After filling, allow the oil to settle, then check the level with the dipstick and top up if needed
- Change intervals depend on driving conditions and oil type; with synthetic 0W-20, many drivers reach 7,500 miles or more between changes, but consult your owner's manual for the recommended schedule
Adhering to the stated capacity and timing helps ensure consistent lubrication and engine longevity.
Practical tips for buying and using oil
Before choosing oil for your Accord LX, consider these practical notes:
- Buy oil that explicitly lists 0W-20 viscosity and API SN or newer, ideally with ILSAC GF-5 certification
- Consider synthetic oil for better protection and longer intervals if you drive in extreme temperatures or heavy stop-and-go traffic
- Use a warranty-compliant filter if required by your maintenance plan, but any compatible Honda OEM or reputable aftermarket filter that meets spec will work
These buying tips help ensure you meet the engine's needs while maximizing performance and longevity.
Summary
The 2014 Honda Accord LX uses 0W-20 engine oil, preferably synthetic, with an oil capacity of about 4.5 quarts including the filter. Choose an oil that meets API SN or newer and ILSAC GF-5 certification, and follow the maintenance schedule in your owner's manual for oil changes. Using the right oil helps protect the engine, maintain efficiency, and preserve warranty coverage.