The Malibu LT from 2014 typically requires Dexos1 Gen 2 synthetic motor oil with a viscosity of 0W-20. The exact specification can vary based on engine and climate, so always verify with the owner's manual or the under-hood label.
In 2014 Chevrolet offered this generation Malibu with a couple of four-cylinder engine options. The oil specification is governed by GM's Dexos1 Gen 2 standard, and the recommended viscosity (often 0W-20) aims to balance cold-start protection with fuel economy. If you find the label or manual calling for a different grade, follow that instruction.
Oil specification and viscosity
Most 2014 Malibu LT models are designed to use Dexos1 Gen 2 certified synthetic oil, with 0W-20 being the common viscosity. Some climates or engine variants may call for a different grade, such as 5W-30; always check the owner's manual or the under-hood sticker to be sure.
Oil capacity and general guidelines
Oil capacity with filter change is typically around 4.5 quarts, though exact capacity can vary by engine and drivetrain configuration. Use a high-quality synthetic Dexos1 Gen 2 oil and a matching oil filter from a reputable brand or an OEM supplier.
How to verify the correct specification
Check the owner's manual for the exact grade and capacity for your engine. If the manual isn’t available, look at the oil filler cap on the engine or contact a Chevrolet dealer for the precise Dexos1 Gen 2 specification and capacity for your VIN.
Summary
In most 2014 Chevy Malibu LT models, the recommended oil is Dexos1 Gen 2 synthetic oil, typically 0W-20. Always verify the exact viscosity and capacity for your specific vehicle in the owner's manual or on the under-hood label, and use a Dexos1 Gen 2 certified oil to ensure proper protection and warranty compliance.