The 2013 Infiniti M37 takes 5W-30 full-synthetic motor oil, and the engine typically requires about 5.7 quarts (with filter) per the owner's manual.
The specification applies to the 3.7-liter VQ37VHE engine used in the M37, and adhering to the correct grade and capacity helps maintain performance and longevity. Always verify the exact requirements for your VIN and local climate in the manual or with a dealer.
Oil type and grade
Below are the official specifications you should match when purchasing or servicing the oil for a 2013 Infiniti M37.
- Viscosity: 5W-30
- Oil type: Full synthetic
- Engine: 3.7L VQ37VHE
- Specifications: API SN (or newer) and ILSAC GF-5 (or newer)
Following these specifications ensures compatibility with the M37’s engine tolerances and Infiniti’s lubrication expectations.
Oil capacity and maintenance basics
Here are the practical details to help with oil changes and level checks.
- Oil capacity: 5.7 quarts (about 5.4 liters) with a new filter
- Oil filter: replace with a new filter during every oil change
- Note: Always use a full-synthetic oil that meets the API and ILSAC specs listed above
Keeping to the correct capacity and using the right oil type helps ensure proper lubrication, filtration, and engine protection between services.
Climate and driving considerations
Standard 5W-30 synthetic is suitable for a wide range of climates typical for Infiniti customers. If you operate the M37 in extreme conditions (very hot climates or severe cold), follow the guidance in the owner's manual or consult a dealer for any climate-specific recommendations.
Summary
For a 2013 Infiniti M37, use 5W-30 full-synthetic motor oil, approximately 5.7 quarts with a new filter, and ensure the oil meets API SN or newer and ILSAC GF-5 or newer standards. This combination aligns with the 3.7L VQ37VHE engine’s lubrication requirements and helps sustain performance and longevity. Always refer to the owner's manual or a certified Infiniti service advisor for your exact vehicle and local conditions.