The 2010 Honda CR-V requires SAE 5W-20 engine oil, and the engine holds about 4.5 quarts including the filter. It can be conventional or synthetic, as long as it meets API standards and the 5W-20 grade Honda specifies.
In this article, we break down the official specification for the 2.4-liter engine, the correct oil capacity, and practical guidance on choosing the right oil and keeping your CR-V running smoothly.
Oil specification and capacity
For the 2010 CR-V equipped with the 2.4-liter engine, the recommended oil grade is 5W-20. The total oil capacity, including the filter, is about 4.5 quarts (roughly 4.3 liters). You should use a high-quality oil that meets current API standards and matches the 5W-20 grade prescribed by Honda. Both conventional and synthetic oils are acceptable as long as they meet these specifications.
Before you choose a product, it helps to know your options and how they align with the car’s requirements.
Oil options that meet Honda’s 5W-20 specification include the following, which can be either conventional, synthetic, or synthetic blend as long as they are labeled 5W-20 and meet API SN (or newer) requirements:
- 5W-20 conventional engine oil
- 5W-20 synthetic engine oil
- 5W-20 synthetic blend engine oil
Regardless of the type you choose, ensure the oil meets API specifications and is clearly labeled 5W-20. Many shoppers opt for Honda Genuine Oil or other reputable brands that offer a 5W-20 product that meets the same standards.
Brand and specification tips
When selecting an oil, prioritize the viscosity (5W-20) and API certification. If in doubt, consult your owner's manual or your local Honda service center to confirm that your climate and driving conditions don’t warrant a variant. Using a reputable brand and performing regular oil changes at the recommended intervals helps protect the engine’s longevity.
How to determine the right oil at the pump
Check the product label to ensure it states 5W-20 and API SN or newer. Verify the capacity and change interval recommended by Honda, and use a compatible oil filter along with the oil change. Always recheck the dipstick after the oil change to ensure the level is within the proper range.
Summary
The 2010 Honda CR-V uses 5W-20 engine oil with an approximate capacity of 4.5 quarts (including the filter). You can use conventional, synthetic, or synthetic-blend oils, as long as the product meets API standards and is labeled 5W-20. Always follow the owner's manual for change intervals and use a compatible oil filter to maintain engine longevity.