For a 2019 Jeep Compass with the 2.4L Tigershark engine, you should use SAE 0W-20 full synthetic motor oil that meets API SN+/ILSAC GF-5 specifications.
The Jeep Compass’ engine calls for a high-quality synthetic oil that maintains performance across the vehicle’s operating temperatures. The exact capacity and service intervals vary by model and conditions, so it’s best to verify with the owner’s manual or the under-hood sticker. The following guide outlines the recommended oil type, how to choose the right product, and how to maintain it properly.
Oil type and specifications
Understanding the required specs helps you select oil that protects the 2.4L Tigershark engine while maintaining efficiency and longevity. The following options meet the factory requirements:
- Viscosity: SAE 0W-20
- Oil type: Full synthetic preferred; synthetic blend acceptable if it meets API SN+/ILSAC GF-5
- Standards: API SN or newer, ILSAC GF-5 (or higher)
- Capacity: Approximately 4.5 quarts with an oil filter (check manual for exact figure)
- Filter: Use a quality oil filter (OEM Mopar or equivalent)
Note: Always verify the exact capacity and specification in your vehicle’s owner’s manual or on the service sticker under the hood, as production changes and trim levels can affect requirements.
Maintenance schedule and checks
Maintaining proper oil health is essential for this engine. The vehicle uses an oil life monitoring system, and the recommended change interval depends on driving conditions and the oil you choose.
- Follow the Oil Life Monitor: Change oil when the system indicates; synthetic oil generally allows longer intervals than conventional
- Short trips, dusty environments, or heavy towing can shorten intervals; consider more frequent changes
- Use genuine or high-quality aftermarket filters and replace the drain plug gasket if needed
- Document service and keep receipts for warranty and resale value
Always consult your dealer or manual for the exact interval, as it can vary by model year, engine, and climate.
Practical tips and FAQs
What if my Compass has a different engine variant?
Some trims or markets may feature different engines; always verify the exact engine code (found in the owner’s manual or on the emissions sticker) to confirm the correct viscosity and specification.
What brands meet the spec?
Many reputable brands offer 0W-20 synthetic that meets API SN+/GF-5, including Mobil 1, Castrol EDGE, Pennzoil Ultra Platinum, and Valvoline. Always check the label to confirm compatibility with API and ILSAC standards.
If you’re unsure, ask your local mechanic or the dealership service department to confirm the exact spec for your VIN.
Summary
The 2019 Jeep Compass with the 2.4L Tigershark engine requires SAE 0W-20 full synthetic oil that meets API SN+/ILSAC GF-5 standards. Use a quality filter and follow the vehicle’s Oil Life Monitor to determine changes; the oil capacity is about 4.5 quarts with a filter, with exact figures found in the manual. Adhering to the specified viscosity and standards helps ensure optimal engine protection and performance.
How many quarts of oil does a 2019 Jeep Compass need?
5 quarts
The 2.4L inline engine in the 2019 Jeep Compass generally requires around 5 quarts of oil with filter change; exact amounts depend on model specifics and should be measured by a technician during service.
What is the best oil for a 2019 Jeep Compass?
2019 JEEP COMPASS Motor Oil
- Valvoline Advanced Protection Full Synthetic Motor Oil SAE 0W-20. 0W-20.
- Valvoline MaxLife Full Synthetic High Mileage Motor Oil SAE 0W-20. 0W-20.
- Valvoline Extended Protection Full Synthetic Motor Oil SAE 0W-20.
- Valvoline MaxLife Extended Protection Full Synthetic High Mileage Motor Oil SAE 0W-20.
Can I put 5W-30 in my Jeep?
What kind of oil does a Jeep Grand Cherokee take? Grand Cherokee oil requirements depend on your model year and engine configuration. Most 2016-newer models with the 3.6L Pentastar V6 require 0W-20 synthetic oil, while earlier models may specify 5W-20 or 5W-30.
Does a Jeep Compass need synthetic oil?
All 2017+ Jeep Compass models with the 2.4L Tigershark engine require 0W-20 full synthetic oil exclusively—Jeep mandates synthetic with no conventional alternative.