The 2015 Nissan Rogue generally uses halogen headlights with H11 bulbs for the low beams and 9005 bulbs for the high beams; fog lights typically use H11 as well. Some trims or regional markets may differ, so it’s best to verify with the owner’s manual or by checking the bulb label inside the headlight housing.
Bulb types and configurations
The following list covers the typical bulb types used in US-spec 2015 Rogue headlight assemblies, noting common variations by trim or market.
- Low-beam headlight: H11 halogen bulb
- High-beam headlight: 9005 (HB3) halogen bulb
- Fog lights: commonly H11 halogen (some markets may use different bulbs such as H16)
Before replacing bulbs, ensure you have the correct type for your vehicle’s exact trim and market. Compatibility and fitment can vary, and using the wrong bulb can damage the assembly or wiring. If in doubt, consult the manual or a dealer.
How to replace headlight bulbs
The following steps provide a general guide to replacing the Rogue’s headlight bulbs. Procedure can vary slightly by trim or regional specification.
- Park the vehicle, turn off the engine, and open the hood. Disconnect the negative battery terminal if recommended by the manual.
- Gain access to the headlight assembly from behind the headlight or through the engine bay. Remove any dust cover or protective cap by turning counterclockwise.
- Unplug the electrical connector from the bulb.
- Release the bulb by twisting counterclockwise or removing the retaining mechanism, depending on the design.
- Insert the new bulb of the same type (H11 for low beams, 9005 for high beams, or as specified for your trim) and reattach the connector.
- Reassemble the housing, test the headlights to ensure proper operation, and close the hood.
When replacing bulbs, handle them with clean gloves or a cloth to avoid transferring oils from your skin to the glass, which can shorten bulb life. Ensure the bulb sits firmly and aligns correctly for proper beam pattern. If a bulb continues to fail, double-check the exact bulb type for your VIN.
Variations by trim and market
Some trims or regional markets may feature different headlight setups. While most US-spec 2015 Rogues use H11 for low beams and 9005 for high beams, certain markets or optional packages may offer HID or LED projector headlights, which use entirely different bulb types or modules and may require different replacement procedures.
LED and HID options
High-end or European-market models may include HID or LED technology. These systems often use ballast-controlled bulbs or LED modules rather than standard halogen bulbs, affecting compatibility and servicing. Always confirm the exact specification for your VIN with the owner’s manual or a Nissan dealer.
Summary
For the 2015 Nissan Rogue, the typical configuration in many markets is H11 low-beam halogen bulbs and 9005 high-beam halogen bulbs, with fog lights commonly using H11. Variations can occur by trim and region, including possible HID or LED configurations on certain models. Always verify bulb type via the owner’s manual or the bulb label, and follow proper replacement procedures to ensure safety and correct beam pattern.