The 2013 Toyota Corolla typically uses separate halogen bulbs for the low and high beams: H11 for the low beam and 9005 for the high beam. Always confirm with your specific vehicle’s manual or the bulb label on the headlight housing, as trims and regional variants can differ.
Typical bulb configuration for the 2013 Corolla
The following configuration applies to most U.S. market 2013 Corollas. If you’re checking a different region or a special edition, double-check the vehicle’s manual.
- Low-beam bulb: H11
- High-beam bulb: 9005 (HB3)
Be aware that some markets or aftermarket headlights may use different setups, such as a dual-beam H4/HB2 arrangement or projector-type assemblies that still use the same bulb sizes for each function. Always verify with the original equipment label or manual.
How to verify the correct bulb for your car
To confirm the exact bulb sizes for your specific vehicle, use one of these methods:
- Check the owner's manual section on headlights and bulbs for the exact part numbers by trim and region.
- Inspect the old bulb itself by removing it from the headlight assembly and reading the stamped size.
- Consult an OEM parts diagram or a reputable parts retailer with your VIN to ensure you order the correct bulbs.
When replacing, it's generally best to replace both bulbs at the same time to maintain consistent brightness and color temperature. If you’re upgrading to aftermarket bulbs, choose reputable brands and verify that they’re compatible with halogen reflectors in the Corolla's headlight housing.
Summary
For a 2013 Toyota Corolla, expect separate low-beam and high-beam bulbs: H11 for low beam and 9005 for high beam in most North American configurations. Always verify for your specific region and trim, and consult the manual or an OEM diagram if in doubt.
What type of headlight does a 2013 Toyota Corolla take?
Toyota Corolla (2011-2013) Bulb Size Chart
| Headlight (High Beam) | 9005 (HB3) |
|---|---|
| Map Light | T10 (194 168) |
| Parking Light | 3157 (3156) |
| Side Marker Light (Front) | T10 (194 168) |
| Side Marker Light (Rear) | 7443 (7440) |
Do I need H11 or 9005?
H11 bulbs are designed for use as low beam headlights, while 9005 bulbs are typically used for high beams. This results in a higher brightness level for the 9005 bulbs compared to the H11 bulbs.
What fog light bulbs are in a 2013 Toyota Corolla?
Features: H11 Halogen Bulb.
What type of headlights does Toyota use?
Common Toyota Headlight Bulb Sizes
| Bulb Size | Application | Typical Toyota Models |
|---|---|---|
| H11 | Low Beam, Fog Lights | Camry, Corolla, RAV4, Highlander |
| 9005 (HB3) | High Beam | Camry, Tacoma, Tundra, 4Runner |
| 9006 (HB4) | Low Beam, Fog Lights | Corolla, Avalon, Sienna |
| H4 (9003) | Dual Beam (High & Low in One) | Older Toyota models, Tacoma, Land Cruiser |