The 2007 CR-V uses a 2.4-liter inline-4 engine with Honda’s i-VTEC variable valve timing, delivering roughly 166 horsepower.
Engine design and features
The following overview outlines the core characteristics of the 2.4L engine used in the 2007 CR-V, including configuration and technology.
- Displacement: 2.4 liters (approximately 2,360 cc)
- Configuration: Inline-4 (I4)
- Valvetrain: DOHC with i-VTEC
- Horsepower: About 166 hp (around 5,800 rpm)
- Torque: About 161 lb-ft (around 4,000 rpm)
- Engine family: Honda K-series (K24)
In summary, the engine is a 2.4L i-VTEC four-cylinder from Honda's K-series lineup, designed for a balance of power and efficiency in the CR-V.
Variants and transmission options
While the core engine remains the same, transmission choices and trim levels affected how the engine interacted with the drivetrain. The following notes describe those options for the 2007 CR-V.
- Transmission options: 5-speed manual or 5-speed automatic, depending on market and trim
- Drive configuration: Front-wheel drive or all-wheel drive available with certain trims
- Maintenance note: The 2.4L i-VTEC engine requires routine timing/valve maintenance and regular oil changes per Honda’s schedule
These options allowed buyers to tailor performance to budget and driving conditions, while the engine itself remained a 2.4L i-VTEC four-cylinder.
Market variations
Engine specs could vary slightly by market (North America vs. Europe) in terms of power output and emissions calibration, but the 2.4L i-VTEC four-cylinder was the standard for the 2007 CR-V in most regions.
Summary: The 2007 Honda CR-V uses a 2.4-liter inline-4 engine with i-VTEC from Honda’s K-series, typically producing around 166 horsepower and 161 lb-ft of torque, with manual or automatic transmissions depending on market and trim.