The lug nuts on a 2018 Honda Accord should be tightened to 80 ft-lbs (108 Nm).
This specification generally applies to factory wheels and standard lug nuts. If your Accord uses aftermarket wheels, a different hub, or special lug hardware, always verify the exact torque in the owner’s or service manual. After any wheel service, it’s good practice to recheck torque after a short test drive.
Specification and scope
For most 2018 Honda Accord applications, the lug nuts are tightened to 80 ft-lbs (108 Nm) using factory conical-seat lug nuts on five-llug wheels. This value is intended to ensure proper seating and safety, and it should be used unless a manual specifies otherwise for your specific wheel combination.
Notes and exceptions
Variations can occur with aftermarket wheels, different wheel diameters, or different lug nut seat types. Always confirm the torque value from the official documentation for your exact wheel configuration and use the correct socket size and torque method.
How to achieve correct torque
To ensure you reach the correct torque, follow these steps using a calibrated torque wrench and the proper lug nuts for your wheels.
- Park the car on a level surface, engage the parking brake, and chock the wheels. Loosen the lug nuts slightly while the wheel is still on the ground.
- Install the wheel and hand-tighten the lug nuts in a star pattern to seat the wheel evenly.
- Set your torque wrench to the final specification of 80 ft-lbs (108 Nm).
- Tighten in a star pattern to the final torque value in two passes: first to about 40 ft-lbs, then to 80 ft-lbs, ensuring the wheel seats evenly.
- Double-check each lug nut for full seating and uniform tension after the final pass.
- After the vehicle has been driven 50–100 miles (80–160 km), recheck and re-torque all lug nuts to 80 ft-lbs if needed.
- Document any wheel changes and maintain a regular inspection schedule, especially if you use aftermarket wheels or have recently replaced tires.
The above steps are designed to help you achieve and verify the correct lug-nut torque, reducing the risk of wheel loss or damage. Always follow the vehicle’s official service guidance and use the proper tools for accuracy.
Summary
Bottom line: for a 2018 Honda Accord, tighten lug nuts to 80 ft-lbs (108 Nm) using a star-pattern sequence and verify with a torque wrench. Recheck after 50–100 miles and consult the owner’s or service manual if you’re using aftermarket wheels or non-standard lug hardware. Proper torque helps ensure wheel integrity and safe driving.
What's the torque on a tire lug nut?
New wheels should be re-torqued after the first 50 to 100 driving miles.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 14 x 1.25 mm | 85 - 90 | 9 |
| 7/16 in. | 70 - 80 | 9 |
| 1/2 in. | 75 - 85 | 8 |
| 9/16 in. | 135 - 145 | 8 |
Ask More
Does 5x112 fit a Honda Accord?
5x112 Set of 4 19" Rims Silver Alloy Wheel fits 2007-25 Honda Accord, OE16 RTX.
Ask More
What is the torque spec on the lug nuts on a 2017 Honda Accord?
The REFERENCE torque spec on the lug nuts on a 2017 Honda Accord is 108 Nm. The Honda Accord lug nuts serve as a very essential part of ensuring wheels and tires stay well attached to the vehicle.
Ask More
What is the torque on a Hyundai Tucson wheel nut?
79-94 lbf·ft
After changing tires, we recommend that an authorized HYUNDAI dealer tighten the lug nuts to their proper torque as soon as possible. The wheel lug nut should be tightened to 11-13 kgf·m (79-94 lbf·ft).
Ask More