The oil filter for a 2017 Honda Fit is typically Honda part number 15400-PLM-A01. This is the standard OEM filter used on the North American-spec 1.5-liter engine, but always verify with your specific vehicle's VIN or your local parts catalog before purchasing.
Part numbers can vary by market and engine revision, so to be certain you have the correct filter, check the parts diagram for your exact VIN, or ask a dealer if you’re unsure. This article provides guidance to confirm and locate the right part number.
Engine and part-number context
The 2017 Honda Fit sold in the United States, Canada, and many other markets uses a 1.5-liter i-VTEC engine (code L15B7). The oil filter is designed to work with 0W-20 or 0W-30 viscosity oils depending on climate and service recommendations. Honda's official parts catalog lists the oil filter as part 15400-PLM-A01 for many North American vehicles of this generation. However, revisions and region-specific listings exist.
Why the part number matters
Using the wrong filter can affect oil flow, filtration efficiency, and engine health. Always match the exact part number to your VIN to ensure compatibility with seals, bypass valves, and mounting threads.
How to confirm the correct part number
To ensure you buy the correct filter, follow these verification steps before ordering. This will help you avoid mismatches that could cause leaks or improper filtration.
- Check the official Honda Parts Catalog or a reputable dealer catalog by entering your VIN or selecting your vehicle (year, make, model, engine). This pulls the exact OEM part number used for your car.
- Consult your owner’s manual or service manual, which sometimes lists the replacement part numbers for routine maintenance items like the oil filter.
- Ask a Honda dealership parts counter or trusted mechanic to confirm the correct filter for your VIN, especially if you’ve modified or replaced the engine in the past.
- If you’re considering an aftermarket option, only use cross-referenced filters from reputable brands and verify their fitment against your VIN as well.
Verifying these details helps ensure you receive the correct filter, avoiding fitment issues or oil leakage.
Where to buy and practical considerations
OEM filters are widely available through Honda parts counters, dealerships, and reputable online retailers. Aftermarket options from brands like Bosch or Wix are common equivalents that generally meet or exceed OEM specifications, but compatibility should always be confirmed for your exact vehicle and climate.
Installation basics
When replacing the oil filter on a 2017 Fit, follow standard oil-change procedures: warm the engine, drain old oil, replace the oil filter with a new gasket, and refill with the recommended oil and oil capacity. Dispose of used oil and filter responsibly.
Summary
For a 2017 Honda Fit, the typical OEM oil filter part number is 15400-PLM-A01, used with the 1.5-liter engine in North America. Always verify the exact part number with your VIN in the official parts catalog or at a Honda dealership to account for regional revisions or aftermarket cross-reference needs. Proper verification helps ensure reliable filtration and engine longevity.