The OEM oil filter for the 2004 Honda Pilot is Honda part number 15400-PLM-A01. Some later production runs and certain markets use revised numbers such as 15400-PLM-A02 or 15400-PLM-A03, so it’s wise to verify against your vehicle’s VIN or with a Honda parts counter.
Understanding the part number and where it applies
The 2004 Pilot uses a 3.5L V6 engine, and the oil filter is specified by Honda’s part numbering system. While 15400-PLM-A01 is the standard reference for many early-2000s Pilots, revisions can occur as Honda updates parts for fitment or production changes. This article outlines the primary number and how to confirm the correct variant for your specific vehicle.
OEM part numbers and common revisions
Below is a brief reference to the oil filter part numbers that are commonly associated with the 3.5L V6 used in the 2004 Pilot and nearby model years. Always double-check with your VIN to ensure exact fitment.
- 15400-PLM-A01 (primary OEM reference for many early 2000s Pilots)
- 15400-PLM-A02 (updated revision used on some later production runs)
- 15400-PLM-A03 (an additional revision used in select markets or production batches)
Verification is key, as production changes and regional differences can shift the exact revision used on a given vehicle. If you’re shopping, bring your VIN and cross-check with a Honda parts catalog or your local dealer.
How to verify the correct filter for your vehicle
To ensure you purchase the right filter, perform a quick check against official sources and your vehicle’s documentation. Start by locating the VIN plate on your Pilot, then consult a partsDatabase or contact a Honda dealership parts desk with the VIN. You can also compare the receiver’s thread size and overall dimensions to filter models that fit the same engine family.
Cross-model sharing and broader compatibility
Several other Honda vehicles with the 3.5L J35 engine family use the same filter type, which can simplify replacement if you own more than one Honda. Models commonly sharing this oil filter family include the Honda Odyssey, Honda Ridgeline, and other Pilot configurations from around the same era. Always confirm fitment by VIN, as some markets may have minor variations.
What to buy and where to look
When shopping, you’ll see both Honda OEM part numbers and aftermarket equivalents. If you’re aiming for exact OEM replacement, select 15400-PLM-A01 (or the corresponding revision your VIN requires). If an aftermarket filter is preferred, ensure it lists compatibility with the 3.5L V6/J35 engine and matches thread size and filtration specifications.
Summary
For a 2004 Honda Pilot, the standard OEM oil filter part number is 15400-PLM-A01. Because Honda may issue revisions such as 15400-PLM-A02 or 15400-PLM-A03 for certain production runs or markets, verify the exact fit using your VIN or by checking with a Honda parts specialist. This approach helps ensure you receive the correct filter and maintain proper engine protection.