There isn’t a single part number for all 2018 Renegades; the oil filter part number depends on the engine installed. The two most common US-market engines are the 2.4L Tigershark I4 and the 1.4L MultiAir Turbo, with additional diesel options in some regions. To get the exact part number, you’ll need your engine code or VIN and a current parts catalog lookup.
Engine options in the 2018 Renegade
The 2018 Renegade was offered with multiple powertrains, and the correct oil filter part number varies by engine. The two most common gasoline engines in US-spec models were:
- 2.4L Tigershark I4 (GME)
- 1.4L MultiAir Turbo
Note: In overseas markets, a 2.0L diesel engine was available on some trims, and those applications use different filters. Always verify against your specific vehicle configuration.
Why the part number varies
The oil filter is designed to match the engine’s mounting, thread size, and filtration requirements. Even within the same model year, different engines can use distinct filter cartridges and mounting adapters, which means the part numbers are not interchangeable across engines. Confirming the exact PN protects against fitment issues and ensures proper oil filtration performance.
How to determine the exact part number
To identify the correct oil filter PN for your Renegade, follow these steps:
- Identify your engine type (2.4L Tigershark, 1.4L Turbo, or diesel) and note the VIN.
- Use the official Mopar Parts Catalog or the Jeep dealership parts lookup by entering year, model, and engine to pull the precise PN.
- Check the oil filter itself for a part number printed on the end or packaging if you have the box or old filter on hand.
- If in doubt, call or visit a Jeep dealer’s parts desk with your VIN to confirm the exact filter PN.
Taking these steps helps avoid ordering errors and ensures you get the correct filter for your vehicle’s engine and oil specifications.
Where to buy and ensure compatibility
Once you have the exact part number, you can source the filter from multiple channels, but prioritize official or reputable sources to guarantee compatibility:
- Official Mopar Parts website or a Jeep dealership parts department
- Major auto parts retailers that offer Mopar-compatible filters
- OEM cross-reference listings that include the engine code and vehicle year
Always verify that the filter you purchase matches your engine code and is listed for your 2018 Renegade by year and trim. If you rely on an aftermarket equivalent, confirm it is rated for the same thread size, sealing dimensions, and filtration capacity as the OEM part.
Summary
The 2018 Jeep Renegade does not have a universal oil filter part number. The correct PN depends on the installed engine—primarily the 2.4L Tigershark I4 or the 1.4L MultiAir Turbo (with diesel variants in some markets). To obtain the precise part number, consult the VIN-based Mopar Parts Catalog, contact a Jeep dealer, or inspect the existing filter for OEM markings. Verifying the exact engine configuration ensures you order the right filter the first time.
What type of oil do I need for a 2018 Jeep Renegade?
Jeep Renegade Oil Type Recommended by the Manufacturer
If you own a Jeep Renegade with a 1.4L engine, the manufacturer recommends SAE 5W-40 full synthetic oil. For the larger, 2.4L engine, use SAE 0W-20 full synthetic oil.
What are the numbers on an oil filter?
What is meant by these numbers?" This system of rating a filter describes its capture efficiency at three specific points in microns. It actually has many advantages over the more common Beta rating methods used today.
What size socket is the oil filter on a 2018 Jeep?
Moving under the hood, use a 24mm socket and extension to loosen the oil filter cap. Be sure to have some shop towels ready to catch any oil that drips off the filter.
What oil filter does a Jeep Renegade use?
MO-090) Genuine MOPAR Original Equipment Oil Filter for your vehicle.