The Fram oil filter number most commonly used for a 2002 Honda Accord V6 is PH7317.
In this article, we explain how Fram's filter cross-reference works for the 2002 Accord V6, what other Fram numbers might apply, and how to verify the right model for your car. We also share installation and maintenance tips to help you keep the engine clean and running smoothly.
Common Fram Filter Numbers for the 2002 Accord V6
Fram maintains multiple cross-references, and PH7317 is the primary fit for many 2002 Accord V6 models. An additional cross-reference that appears in some catalogs is PH9688, depending on the exact vehicle specification and production date.
- PH7317 — Fram Extra Guard (commonly used for a 2002 Honda Accord V6 3.0L)
- PH9688 — Fram XG or alternative cross-reference used for some late-model 3.0L V6 Accords
If your exact car does not match these options, use Fram's cross-reference search by entering your vehicle's year, make, model, and engine to confirm the correct filter.
How to Verify the Right Filter for Your Specific Car
Before you buy, confirm the correct Fram part number for your exact car since small variations can occur by production date or trim level.
- Check your owner's manual or inspect your current filter for any stamped part numbers; use that information to cross-check with Fram's catalog.
- Identify your engine size (most 2002 Accord V6 models use a 3.0L V6) and cross-check it against Fram's filter compatibility list.
- Use Fram’s official cross-reference tool or ask a parts specialist to verify the exact number for your VIN.
- If shopping in a store, tell the associate you need a Fram oil filter for a 2002 Honda Accord V6 and compare packaging to PH7317 (and PH9688 as a potential alternative).
Following these steps helps ensure you select the correct filter for your specific vehicle configuration.
Installation and Maintenance Tips
Once you have the correct Fram filter, follow these best practices to install and maintain the oil system effectively.
- Prepare the work area, have a new gasket, and lightly oil the gasket surface on the filter before installation.
- Remove the old filter, wipe the mounting surface, install the Fram filter by hand until snug, then tighten according to Fram’s guidance (typically a final snug turn after contact).
- Refill with the recommended oil grade for your vehicle, start the engine, and check for leaks; recheck the oil level after a brief idle and again after a short drive.
Regular oil changes using the correct filter help maintain engine cleanliness and performance, following the interval advised in your owner’s manual or by your oil brand’s recommendations.
Summary
For the 2002 Honda Accord V6, Fram’s PH7317 is the primary oil filter number you’ll encounter, with PH9688 listed as a possible alternative depending on the exact vehicle specification. Always verify the correct part using Fram’s cross-reference tools or a knowledgeable parts professional, and follow proper installation and maintenance steps to keep your engine running smoothly.