The typical oil filter number for the 2018 Honda Pilot with a 3.5-liter V6 is 15400-PLM-A01. Some production runs may use 15400-PLM-A02, so it’s important to verify against your vehicle’s VIN.
The 2018 Honda Pilot is powered by a 3.5L V6 engine (J35A8). Because small variations can occur by production date or market, the exact filter part number should be confirmed for your specific vehicle. This article provides the standard reference and steps to ensure you get the correct filter.
OEM part numbers commonly associated with the 2018 Pilot
Below is a concise list of Honda’s officially referenced oil filter numbers that appear with the 2018 Pilot. If you are purchasing from a dealer or Honda Parts catalog, these are the numbers you’ll typically see.
- 15400-PLM-A01 – Most 2018 Pilot 3.5L V6 models use this as the standard OEM oil filter.
- 15400-PLM-A02 – Some early- or late-production builds may list this variant; check your VIN to confirm.
When in doubt, confirm with a Honda dealer or via Honda’s official parts lookup using your vehicle’s VIN to ensure you receive the exact match for your build date and market.
Tips for cross-referencing with aftermarket options
If you prefer aftermarket filters, choose brands that explicitly list compatibility with the Honda 3.5L V6 and verify the filter’s thread size and gasket diameter match your engine’s requirements. Common reputable brands include Purolator, Bosch, Wix, and Fram, but always double-check the exact model number against your vehicle’s VIN or the dealer’s catalog.
Examples of how to verify aftermarket compatibility:
- Look up the filter by your vehicle’s year, make, model, and engine (2018 Honda Pilot, 3.5L V6) in the aftermarket brand’s catalog.
- Match the overall filter size, thread size, and gasket diameter to the OEM specification (the OEM filter typically measures around 3.2–3.5 inches in diameter, with standard M20x1.5 thread on many Honda engines).
- Cross-check the replacement’s cross-reference list against the OEM part number 15400-PLM-A01 (or A02, if your VIN indicates it).
Note: OEM part numbers are the most reliable way to ensure proper fit and filtration performance for your specific vehicle configuration.
How to verify the exact part for your VIN
To ensure you purchase the correct oil filter for your exact car, use these verification steps. They help prevent mismatches due to production changes or regional differences.
- Locate your Vehicle Identification Number (VIN). It can be found on the lower driver’s side windshield pillar, registration documents, or the dashboard display when viewed from the outside.
- Visit the official Honda Parts Catalog or a trusted dealer website and enter your VIN to view the exact OEM filter part number for your vehicle.
- Compare the catalog-listed part number with 15400-PLM-A01 (or 15400-PLM-A02, if indicated for your VIN) before ordering.
- If you already have the old filter, check for a stamped part number on the filter canister as a quick reference.
- If in doubt, call your local Honda dealer and provide your VIN to confirm the correct filter number before purchase.
Following these steps will help ensure you select the correct oil filter for your specific 2018 Honda Pilot configuration.
Summary
The standard OEM oil filter for most 2018 Honda Pilot models with the 3.5L V6 is 15400-PLM-A01, with 15400-PLM-A02 listed for some builds. Always verify using your VIN via the official parts catalog or your dealer to confirm the exact part number for your vehicle. When in doubt, rely on the OEM reference for the most precise fit and performance.