The oil filter number depends on your engine: 2.4-liter models typically use 15400-PLM-A01, while the 3.5-liter V6 uses 15400-PLM-A02. Always verify with your VIN or the owner's manual to be certain.
Overview of the 2013 Accord engine options
The 2013 Honda Accord was offered with two main powertrains in many markets: a 2.4-liter inline-4 and a 3.5-liter V6. Each engine uses a different oil filter, so it's important to match the filter to the engine you have.
Oil filter numbers by engine
The following list pairs the common OEM oil filter part numbers with the corresponding engine configuration found in the 2013 Accord.
- 2.4L inline-4 engine (most common in LX/EX trims): 15400-PLM-A01
- 3.5L V6 engine (EX-L, Touring trims and certain configurations): 15400-PLM-A02
These part numbers are the typical Honda OEM references for the 2013 Accord. If your car has a different market, trim, or if you’re using an aftermarket filter, there may be alternate numbers. Always cross-check with your VIN and the official parts catalog.
How to confirm the correct filter for your car
Check the engine code and VIN
Locate the engine code under the hood and compare it to Honda’s official parts listings, or enter your VIN into an official Honda parts catalog or a trusted parts retailer to confirm the exact oil filter part number.
If you’re unsure, contact a Honda dealer or a qualified mechanic. Providing your VIN will help the parts specialist pull the exact oil filter for your car’s configuration and production year.
Why the right filter matters
Using the correct oil filter ensures proper filtration, oil pressure, and engine protection. An incorrect filter can affect oil flow, potentially impacting lubrication and engine longevity. When in doubt, replace with the OEM filter specified for your engine and model year.
Summary
For a 2013 Honda Accord, the oil filter number hinges on the engine: 15400-PLM-A01 for the 2.4L engine and 15400-PLM-A02 for the 3.5L V6. Always verify with your VIN or the owner’s manual, and consult the official Honda parts catalog or a dealer to confirm the exact filter before purchasing.
What is the part number of the Honda oil filter?
15400-PLM-A02
Genuine Honda Oil Filter - 15400-PLM-A02.
What oil filter does a 2013 Honda Accord take?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
What is the oil filter number for a 2013 Honda Fit?
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021. Its job is to collect both the impurities in motor oil and whatever else accumulates as the oil lubricates engine parts.
What type of oil does a 2013 Honda Accord take?
The recommended Honda Accord oil is generally a synthetic 0W-20 formula.