Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What is the oil filter number for a 2007 Honda Accord?

For the 2007 Honda Accord, the oil filter part number depends on the engine. The most common numbers are 15400-PLM-A02 for the 2.4-liter inline-four and 15400-PRB-A01 for the 3.0-liter V6. Always verify against your specific engine code to be sure.


In 2007, the Accord was offered with two main engine configurations in many markets: a 2.4 L four-cylinder and a 3.0 L V6. Because Honda’s parts catalog ties filters to engine families, the correct filter number varies by which engine your car has. The following guide outlines the typical OEM numbers tied to each engine variant and notes the importance of double-checking for regional differences or production changes.


Engine options and corresponding oil filter numbers


Below are the two primary engine variants found in the 2007 Accord and the OEM oil filter numbers commonly associated with them. If your car does not match these exact configurations, or you are in a different market, verify with the VIN or current filter.



  • 2.4 L inline-4 engine (common in US models): OEM oil filter part number 15400-PLM-A02.

  • 3.0 L V6 engine (common in higher trims): OEM oil filter part number 15400-PRB-A01.


Note: Some production runs or regional markets may use a slightly different suffix (for example A01 vs A02) while still fitting the same filter housing. Always confirm with the exact engine code or VIN to avoid ordering the wrong part.


How to verify the exact filter for your car


To ensure you install the correct oil filter, use one of these verification options before ordering:



  1. Inspect the existing filter for its part number printed on the canister.

  2. Use your vehicle's VIN in a Honda parts catalog or at a dealership to pull the correct OEM number for your specific car.

  3. Consult your owner's or service manual, which lists the recommended filter number for each engine variant within the 2007 Accord lineup.


With the right number confirmed, you can purchase the filter from Honda, an authorized parts dealer, or a reputable aftermarket supplier that lists compatibility with the exact OEM number.


Summary


The 2007 Honda Accord uses two main oil filter numbers depending on the engine: 15400-PLM-A02 for the 2.4 L I4 and 15400-PRB-A01 for the 3.0 L V6. Because regional differences and production changes can affect the exact suffix, always verify the correct part number using your engine code or VIN to ensure an exact match. Regularly replacing the filter with the correct part helps maintain proper oil pressure and engine longevity.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.