The oil filter code most commonly associated with the Honda S2000 is the OEM part numbers 15400-PLM-A01 for AP1 (2000–2003) and 15400-PLM-A02 for AP2 (2004–2009). Exact codes can vary by market and year, so it’s best to verify against your vehicle’s VIN or the filter itself.
Official Honda part numbers by model year
Below are the two primary Honda OEM oil filter part numbers used on the S2000, corresponding to its two generations. Regional differences can occur, so always confirm with official catalogs if you’re unsure.
- AP1 (2000–2003 US-spec S2000): 15400-PLM-A01
- AP2 (2004–2009 US-spec S2000): 15400-PLM-A02
These numbers reflect the typical OEM filters used on the S2000's F20C engine. If your car is outside the US market or has a special edition, verify with a dealer or by checking the filter’s stamping.
How to confirm the correct filter for your car
To be certain you’re using the right filter, use the following steps. They help ensure you match the exact part to your car’s year and market.
Check the existing filter
Look for the part number stamped on the side or end of the current oil filter to confirm the correct replacement.
Reference manuals or dealer catalogs
Consult the owner's manual, service manual, or Honda's official parts catalog for your VIN to obtain the precise PN for your car.
- Inspect the currently installed filter for the stamped part number.
- Refer to the owner's or service manual and note the recommended OEM PN.
- Contact a Honda dealer or use an official online parts catalog with your VIN to confirm the exact PN for your market/year.
Using the correct filter PN ensures proper fitment, sealing, and filtration for the S2000’s F20C engine.
Cross-references and aftermarket options
While the Honda OEM filter is designed for perfect compatibility, many aftermarket brands offer cross-reference equivalents. When considering alternatives, verify the filter’s dimensions, thread size, gasket diameter, and overall height to ensure a proper fit.
Aftermarket considerations
If you choose an aftermarket filter, confirm the cross-reference to Honda’s PN and ensure it matches your vehicle’s year and market. Retain the receipt and compare the installed unit’s PN with your catalog to avoid mismatches.
Summary
The S2000 typically uses Honda’s OEM oil filter part numbers 15400-PLM-A01 (AP1) and 15400-PLM-A02 (AP2), though regional variations can exist. Always verify with your VIN, the filter itself, or official Honda catalogs to ensure you obtain the correct part, and use aftermarket options only after confirming a precise match.