The Mopar oil filter most commonly used on the Jeep Gladiator’s standard 3.6L Pentastar V6 is part number 05183866AC.
The Gladiator line offers more than one engine option across years and trims, so the exact filter number can vary. While 05183866AC is the typical OE pick for the 3.6L engine, other configurations—such as the EcoDiesel 3.0L—use different Mopar part numbers. Always verify with your VIN or consult the official Mopar Parts catalog before purchasing.
Engine options and Mopar oil filter numbers
Below are the primary Gladiator engine options and the corresponding guidance on OE filter numbers. This helps you identify the right part, but confirmation via VIN is advised for accuracy.
- 3.6L Pentastar V6 (most Gladiator models): Mopar oil filter part number 05183866AC.
- 3.0L EcoDiesel V6 (optional on some models/years): Mopar oil filter numbers vary by year; check the Mopar Parts catalog or with a dealer using your VIN.
- Other configurations or special editions: verify the exact filter number with Mopar Parts using your vehicle’s VIN.
Concluding: For the majority of Gladiator builds with the 3.6L engine, 05183866AC is the standard Mopar oil filter. Always confirm the exact number for your specific vehicle configuration, especially if your Gladiator has the EcoDiesel option or other variations.
How to verify the correct filter for your Gladiator
Use these steps to ensure you order the correct OE filter:
- Check your owner’s manual for the recommended Mopar part number for your engine and year.
- Enter your vehicle’s VIN on the Mopar Parts website or contact a Jeep dealer parts desk to pull the exact OE filter number.
- Compare the filter’s specifications (thread size, gasket diameter, and height) with the filter currently installed on your Jeep.
Concluding: Verification via VIN and official catalogs minimizes the risk of ordering the wrong filter, particularly when multiple engines are offered for the Gladiator.
Why using the OEM filter matters
Using the Mopar-approved filter ensures compatibility with the engine’s oil flow, filtration efficiency, and warranty considerations. While aftermarket filters can be cheaper, they may not match FCA’s exact specifications.
Summary
For most Jeep Gladiator models equipped with the 3.6L Pentastar engine, the Mopar oil filter part number is 05183866AC. Always verify against your VIN and engine code to confirm the exact filter number, especially if your Gladiator has the EcoDiesel 3.0L or other configurations. Checking the official Mopar Parts catalog or consulting a Jeep dealer will ensure you obtain the correct filter for your vehicle.